| view all |
| M.Sánchez-Juny, E. Bladé and J. Dolz |
| Pressures on a stepped spillway |
| Journal of Hydraulic Research FLUMEN, Vol. 46, No. 4, pp. 574–576, 2008 |
| Oliver J., Linero D.L., Huespe A.E. and Manzoli O.L. |
| Two-dimensional modelling of material failure in reinforced concrete by means of a continuum strong discontinuity approach |
| Computer Methods in Applied Mechanics and Engineering, Vol. 197, nº 5, pp. 332-348, 2008 |
| Rastellini F., Oller S., Salomón O. and Oñate E. |
| Composite material non-linear modelling forlong fibre-reinforced laminates. Continuum basis, computational aspects and validations |
| Computers and structures, Vol. 86, Nº 9, pp. 879-896, 2008 |
| Faleiro J., Oller S., and Barbat A.H. |
| Plastic-damage seismic model for reinforced concrete frames |
| Computers and Structures, Vol. 86, Nº 7-8, pp. 581-597, 2008 |
| Faleiro J., Oller S., and Barbat A.H. |
| Plastic-damage seismic model for reinforced concrete frames |
| Computers and Structures, Vol. 86 (7-8), pp. 581-597, 2008 |
| Nallim L. and Oller S. |
| An analytical-numerical approach to simulate the dynamic behaviour of arbitrarily composite plates |
| Composite Structures, Vol. 85, Nº4, pp. 311-325, 2008 |
| S. Badia and R. Codina |
| Pressure segregation methods based on a discrete pressure Poisson equation. An algebraic approach |
| INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, Vol. 56, Nº4, pp. 351-382, 2008 |
| S. Badia |
| Annalisa Quaini and Alfio Quarteroni. Splitting methods based on algebraic factorization for fluid-structure Interaction |
| IAM Journal on Scientific Computing, Vol. 30, No. 4, pp. 1778-1805, 2008. |
| S. Badia, F. Nobile and C. Vergara |
| Fluid-structure partitioned procedures based on Robin transmission conditions |
| Journal of Computational Physics, Vol. 227, No. 14, pp. 7027-7051, 2008. |
| S. Badia and R. Codina |
| Algebraic pressure segregation methods for the incompressible Navier-Stokes equations |
| Archives of Computational Methods in Engineering, Vol. 15, pp. 343-369, 2008. |
| S. Badia |
| Annalisa Quaini and Alfio Quarteroni. Modular vs. non-modular preconditioners for fluid-structure systems with large added-mass effect |
| Computer Methods in Applied Mechanics and Engineering, Vol. 197, No. 49-50, pp. 4216-4232, 2008. |
| A.H. Barbat, L. G. Pujades, N. Lantada |
| Seismic damage evaluation in urban areas using the capacity spectrum method: Application to Barcelona |
| SOIL DYNAMICS AND EARTHQUAKE ENGINEERING, Vol. 28, Nº10, pp.851-865, 2008 |
| G. Bugeda, J.J. Rodenas, E. Oñate |
| An integration of a low cost adaptive remeshing strategy in the solution of structural shape optimization problems using evolutionary methods |
| COMPUTERS & STRUCTURES, Vol. 86 (13-14), 2008 |
| O. D. Cardona, M.G. Ordaz, M. C. Marulanda, A.H. Barbat |
| Estimation of Probabilistic seismic losses and the public economic resilience - An approach for a macroeconomic impact evaluation |
| JOURNAL OF EARTHQUAKE ENGINEERING, Vol. 12 Nº1, pp. 60-70, 2008 |
| O.D.Cardona, M. G. Ordaz, L.E. Yamin, M.C. Marulanda and A.H. Barbat |
| Earthquake loss assessment for integrated disaster risk management |
| JOURNAL OF EARTHQUAKE ENGINEERING, Vol. 12 Nº1, pp. 48-59, 2008 |
| M. Cervera |
| An orthotropic mesh corrected crack model |
| Computer Methods in Applied Mechanics and Engineering, Vol. 197 (17-18), pp. 1603-1619, 2008 |
| M. Chiumenti, C. Agelet de Saracibar, M. Cervera |
| On the numerical modeling of the thermomechanical contact for metal casting analysis |
| Journal of Heat Transfer, ASME, Vol. 130 Nº6, pp. 1-10, 2008 |
| R. Codina |
| Analysis of a stabilized finite element approximation of the Oseen equations using orthogonal subscales. |
| APPLIED NUMERICAL MATHEMATICS, Vol. 58 Nº 3, pp. 264-283, 2008 |
| R. Codina, J. M. González-Ondina, G. Díaz-Hernández and J. Principe |
| Finite element approximation of the modified Boussinesq equations using a stabilized formulation. |
| International Journal for Numerical Methods in Fluids, Vol. 57, pp. 1305-1322, 2008 |
| R. Codina |
| Finite element approximation of the hyperbolic wave equation in mixed form. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 197 (13-16) : pp. 1305-1322, 2009 |
| N. Lantada, L.G. Pujades, A.H. Barbat |
| Vulnerability index and capacity spectrum based methods for urban seismic risk evaluation. A comparison |
| NATURAL HAZARDS, Vol. 51 pp. 501–524, 2009 |
| O. L. Manzoli , J. Oliver , A.E. Huespe and G. Diaz |
| A mixture theory based method for three dimensional modeling of reinforced concrete members with embedded crack finite elements. |
| Computers and Concrete., Vol. 5, No.4, pp. 401-416, 2008 |
| X. Martinez, S. Oller, F. Rastellini and A.H. Barbat |
| Numerical procedure for the computation of RC structures reinforced with FRP using the seria/parallel mixing theory |
| COMPUTERS & STRUCTURES, Vol. 86 Nº15-16, pp.1604-1618, 2008 |
| P. Mata P, A. Barbat, S. Oller, Boroschek |
| Constitutive and Geometric Nonlinear Models for the Seismic Analysis of RC Structures with Energy |
| Archives of Computational Methods in Engineering, Vol. 15, Nº4, pp. 489-539, 2008 |
| L.G. Nallim, S.Oller |
| An analytical-numerical approach to simulate the dynamic behaviour of arbitrarily laminated composite plates |
| Composite Structures, Vol. 85, Nº4, pp.311-325, 2008 |
| J. Oliver, D.L. Linero, A.E. Huespe and O.L. Manzoli |
| Two-dimensional modelling of material failure in reinforced concrete by means of a continuum strong discontinuity approach |
| Computer Methods in Applied Mechanics and Engineering, Vol. 197, Nº5, pp: 332-348, 2008 |
| J. Oliver, A.E. Huespe and J.C. Cante |
| An implicit/explicit integration scheme to increase of non-linear material and contact/friction problems |
| Computer Methods in Applied Mechanics and Engineering, Vol. 197, pp. 1865-1889, 2008 |
| P.J. Sánchez, A.E. Huespe and J. Oliver |
| On some topics for the numerical simulation of ductile fracture |
| International Journal of Plasticity, Vol 24 , pp 1008-1038 , 2008 |
| Rastellini F., Oller S., Salomon O. and Oñate E. |
| Composite materials non-linear modelling for long fibre-reinforced laminates. Continuum basis, computational aspects and validations |
| Computers and Structures, Vol. 86 (9), pp. 879-896, 2008 |
| Idelsohn S.R., Marti J., Limache A. and Oñate E. |
| Unified Lagrangian formulation for elastic solids and incompressible fluids: Application to fluid-structure interaction problems via the PFEM |
| Computer Methods in Applied Mechanics and Engineering, Vol. 197 (19-20), pp. 1762-1776, 2008 |
| Oñate E., Idelsohn S.R., Celigueta M.A., Rossi R. |
| Advances in the particle finite element method for the analysis of fluid-multibody interaction and bed erosion in free surface flows |
| Computer Methods in Applied Mechanics and Engineering, Vol. 197 (19-20), pp. 1777-1800, 2008 |
| A. Larese, R. Rossi, E. Oñate and S.R. Idelsohn |
| Validation of the particle finite element method (PFEM) for simulation of free surface flows |
| Engineering Computations, Vol. 25 (3-4), pp. 385-425, 2008 |
| C. Labra, J. Rojek, E. Oñate and F. Zárate |
| Advances in discrete element modelling of underground excavations |
| Acta Geotechnica, Vol. 3 (4), pp. 317-322, 2008 |
| García-Espinosa J., Valls A. and Oñate E. |
| ODDLS: A new unstructured mesh finite element method for the analysis of free surface flow problems |
| Int. Journal for Numerical Methods in Engineering, Vol 76 (9), pp. 1297-1327, 2008 |
| Nadukandi P., Oñate E. and García-Espinosa J. |
| Analysis of a consistency recovery method for the 1D convection-diffusion equation using linear finite elements |
| International Journal for Numerical Methods in Fluids, Vol. 57 (9), pp 1291-1320, 2008 |
| López R., Balsa-Canto E. and Oñate E. |
| Neural networks for variational problems in engineering |
| Int. Journal for Numerical Methods in Engineering, Vol. 75 (11), pp. 1341-1360, 2008 |
| Fragakis Y. and Oñate E. |
| Parallel Delaunay triangulation for particle finite element methods |
| Communications in Numerical Methods in Engineering, Vol. 24 (11), pp. 1009-1017, 2008 |
| López R. and Oñate E. |
| An extended class of multilayer perceptron |
| Neurocomputing, Vol. 71 (13-15), pp. 2538-2543, 2008 |
| Bugeda G., Ródenas J. J y Oñate E. |
| An integration of a low cost adaptive remeshing strategy in the solution of structural shape optimization problems using evolutionary methods |
| Computers and Structures, Vol. 86 (13-14), pp. 1563-1578, 2008 |
| Ortega E., Oñate E. and Idelsohn S. |
| A finite point method for adaptive-three-dimensional compressible flow calculation |
| International Journal for Numerical Methods in Fluids, Vol. 60, issue 9, pp. 937-971 |
| P. Mata, A. H. Barbat, S. Oller and R. Boroschek, |
| Constitutive and geometric nonlinear models for the seismic analysis of RC structures with energy dissipators |
| Archives of Computational Methods in Engineering, Vol. 15, pp. 489-539, 2008 |
| J. C. Vielma, A. H. Barbat y S. Oller |
| Un índice de daño sísmico objetivo para la evaluación de los edificios de hormigón armado |
| Hormigón y acero, Vol. 59, No. 248 pp. 53-64, 2008. |
| J. C. Vielma, A. H. Barbat y S. Oller |
| Comportamiento sísmico de edificios de hormigón armado de ductilidad limitada |
| Hormigón y acero, Vol. 248, pp. 87-101, 2008 |
| S. Oller, X. Martínez, A. H. Barbat and F. Rastellini |
| Advanced composite material simulation |
| Ciencia e Technologia dos Materiais, Vol. 20(1-2), pp.2-14, 2008 |
| M. C. Marulanda, O. D. Cardona and A. H. Barbat |
| The economic and social effect of small disasters. Revision of the local disaster index and the case study of Colombia |
| SOURCE, Vol. 10, pp.110-120, 2008 |
| C. A. Bermúdez, A. H. Barbat y L. G. Pujades |
| Vulnerabilidad sísmica de un edificio de acero localizado en Manizales, Colombia |
| Hormigón y acero, Vol. 250, pp.77-94, 2008 |
| R.Miró, F.Pérez, S.Oller, J.Miquel, J.González |
| Road Materials and Pavement Design an International Journal,, Vol 9/4, pp.711-730, 2008 |
| S. Oller, X. Martinez, A. Barbat, F. Rastellini |
| Advanced Composite material Simulation. |
| Ciência e Tecnologia dos Materiais, Vol. 20, No. 1,2; pp.1-14, 2008. |
| Kim K.D., Lomboy G.R. and Oñate E. |
| A co-rotational 8-node resultant shell element for progressive nonlinear dynamic failure analysis of laminated composite structures |
| Mechanics of advanced materials and structures, Vol. 14, Nº. 2, pp 89-107, 2007 |
| Pinyol N., Vaunat J. and Alonso E.E. |
| A constitutive model for soft clayey rocks that incluude weathering effect |
| Géotechnique, Vol. 57, Nº 2, pp. 137-151, 2007 |
| Gens A., Vaunat J., Garitte B. and Wileveau Y. |
| In situ behaviour of a stiff layered clay subject to thermal loading Observations and interpretation |
| Géotechnique, Vol. 57, Nº 2, pp. 207-228, 2007 |
| Roca P., López-Almansa, Miquel J. and Hanganu A. |
| Limit analysis of reinforced masonry vaults |
| Engineering Structures, Vol. 29, pp 431-439, 2007 |
| Valdemoro H.I., Sánchez-Arcilla A. and Jiménez J.A. |
| Coastal dynamics and wetlands stability. The Ebro delta case |
| HYDROBIOLOGIA, Vol. 577, pp. 17-29, 2007 |
| Ciancio D., Carol I. and Cuomo M. |
| Crack opening conditions at "corner nodes" in fe analysis with cracking along mesh lines |
| Engineering Fracture Mechanics, Vol. 74, Nº 13, pp. 1963-1982, 2007 |
| Badia S y Codina R. |
| On some fluid-structure iterative algorithms using pressure segregation methods. Application to aeroelasticity |
| International Journal for Numerical Methods in Engineering, Vol. 72, pp. 46-71, 2007 |
| Badia S y Codina R. |
| Convergence analysis of the FEM approximation for the first order projection method for incompressible flows and without the inf-supcondition |
| Numerische Mathematik, Vol. 107, pp. 533-557, 2007 |
| Guasch O and Codina R. |
| An algebraic subgrid scale finite element method for the convected Helmholtz equation in two dimensions with applications in aeronautics |
| Computer Methods in Applied Mechanics and Engineering, Vol 196, 4672-4689, 2007 |
| Owen H. C. and R. Codina |
| A finite element model for free surface flows on fixed meshes |
| International Journal for Numerical Methods in Fluids, Vol. 54, pp. 1151-1171, 2007 |
| Codina R. and Principe J. |
| Dynamic subscales in the finite element approximation of thermally coupled incompressible flows |
| International Journal for Numerical Methods in fluids, Vol. 54, 707-730, 2007 |
| Codina R., Principe P., Guasch O. y Badia S. |
| Time dependent subscales in the stabilized finite element approximation of incompressible flow problems |
| Computer Methods in Applied Mechanics and Engineering, Vol. 196, pp. 2413-2430, 2007 |
| Houzeaux G.and Codina R. |
| A finite element method for the solutionof rotary pumps |
| Computers & Fluids, Vol. 36, 667-679, 2007 |
| Papadrakakis M., Papadopoulos V., Lagaros N.D., Oliver J., Huespe A.E. and Sánchez P. |
| Vulnerability analysis of large concrete dams using the continuum strong discontinuity approach and neural networks |
| Structural Safety, Vol. 30 (3), pp. 217-235, 2008 |
| Pulido M.D. G. and Oliver J. |
| Contribuciones a la simulación numérica del fallo material en deformaciones finitas. Modelos degradables |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 22, nº 4, pp. 437-473, 2007 |
| Pulido M.D. G. and Oliver J. |
| Contribuciones a la simulación numérica del fallo material en deformaciones finitas. Modelos elastoplásticos |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.23, nº 1, pp.89-115, 2007 |
| Sánchez P. J., Huespe A.E. and Oliver J. |
| On some topics for the numerical simulation of ductile fracture |
| International Journal of Plasticity, Vol. 23 nº 1, pp.1-40, 2007 |
| Carreño M.L., Cardona O.D. and A.H. Barbat |
| Urban seismic risk evaluation: A holistic approach |
| Natural Hazards, Vol. 40, pp. 137-172, 2007 |
| Carreño M.L., Cardona O.D. and Barbat A.H. |
| Disaster risk management perfomance index |
| Natural Hazards, Vol. 41, pp.1-10, 2007 |
| Vielma J.C., Barbat A.H. and Oller S. |
| Comparación entre los factores de reducción de respuesta de la norma NCSE-02 y el Eurocódigo 8 |
| Hormigón y Acero, Vol.246, pp.79-95, 2007 |
| Barbat A.H., Vielma J.C. and Oller S. |
| Aspectes del disseny conceptual dels edificis de formigó armat |
| La Punxa, Vol. 43, pp.26-33, 2007 |
| González J.M., Miquel J., Oller S., Miró R. |
| A viscoplastic constitutive model with strain rate variables for asphalt mixtures |
| Numerical simulation. Computational Materials Science, Vol. 38. pp.543-560, 2007 |
| De la Cruz S.T., López-Almansa F., Oller S. |
| Numerical simulation of the seismic behavior of building structures equipped with friction energy dissipators |
| Computers and Structures, Vol. 85, Nº 1-2, pp.30-42, 2007 |
| Mata P., Boroscheck R., Barbat A. and Oller S. |
| High damping rubber model for energy dissipating devices |
| Journal of Earthquake Engineering, vol. 11, pp.231-256, 2007 |
| Mata A., Oller S., Barbat A. |
| Static analysis of beam structures under nonlinear geometric and constitutive behaviour |
| Computer Methods in Applied Mechanics and Engineering, Vol. 196, pp. 4458-4478, 2007 |
| Mata A., Oller S., Barbat A. |
| Dynamic analysis of beam structures considering geometric and constitutive nonlinearity |
| Computer Methods in Applied Mechanics and Engineering, Vol. 197, pp. 857-978, 2007 |
| Vielma J.C., Barbat A.H., Oller S. |
| Curvas de fragilidad y matrices de probabilidad de daño de edificios de concreto armado con ductilidad limitada |
| Revista Internacional de Desastres Naturales Accidentes e Infraestructura Civil en Ingeniería, Vol. 7, nº 2-3, pp. 273-286, 2007 |
| Nallim L. and Oller S. |
| An analytical-numerical approach to simulate the dynamic behaviour of arbitrarily composite plates |
| Composite Structures, Vol. 85, Nº4, pp. 311-325, 2008 |
| Lomboy G.R., Kim K.D. and Oñate E. |
| A co-rotational 8-node resultant shell element for progressive nonlinear dynamic failure analysis of laminated composite structures |
| Mechanics of Advanced Materials and Structures, Vol. 14, pp. 89-105, 2007 |
| Oñate E., Miquel J. and Zárate F. |
| Stabilized solution of the multidimensional advection-diffusion-absorption equation using linear finite elements |
| Computers & Fluids, Vol. 36, pp. 92 - 112, 2007 |
| Felippa C. A. and Oñate E. |
| Nodally exact Ritz discretizations of 1D diffusion-absorption and Helmholtz equations by variational FIC and modified equation methods |
| Computational Mechanics, Vol. 39, pp. 91 - 111, 2007 |
| Flores F. and Oñate E. |
| A rotation-free shell triangle for the analysis of kinked and branching shells |
| Int. Journal for Numerical Methods in Engineering, Vol. 69, pp. 1521-1551, 2007 |
| Oñate E., Valls A. and García J. |
| Computation of turbulent flows using a finite calculus-finite element formulation |
| International Journal for Numerical Methods in Fluids, Vol. 54, pp 609-637, 2007 |
| Oñate E., Valls A. and García J. |
| Modeling incompressible flows at low and high Reynolds numbers via a finite calculus-finite element approach |
| Journal of Computational Physics, Vol. 224, pp 332-351, 2007 |
| Rojek J. and Oñate E. |
| Multiscale analysis using a coupled discrete/finite element model |
| Interaction and Multiscale Mechanics: An International Journal (IMMIJ) , Vo. 1, Nº1, pp.1-31, 2007 |
| Ortega E., Oñate E. and Idelsohn S. |
| An improved finite point method for tridimensional potential flows |
| Computational Mechanics, Vol 40, pp. 949-963, 2007 |
| Del Pin F., Idelsohn S. and Oñate E. |
| The ALE/Lagrangian Particle Finite Element Method: A new approach to computation of free-surface flows and fluid-object interactions |
| Computers & Fluids, Vol. 36 Nº 1, pp. 27-38, 2007 |
| Limache A., Idelsohn S., Rossi R. and Oñate E. |
| The violation of objectivity in Laplace formulations of the Navier-Stokes equations |
| International Journal for Numerical Methods in Fluids, Vol. 54 (6-8), pp 639-664 , 2007 |
| Lhoner R., Yang C. and Oñate E. |
| Simulation of flows with violent free surface motion and moving objects using unstructured grids |
| International Journal for Numerical Methods in Fluids, Vol. 53 (8), pp 1315-1338, 2007 |
| Botello S., Esqueda H., Hernández A., Zárate F., Valdéz G. |
| Estrategias evolutivas aplicadas en la optimización de problemas con interacción fluido-sólido |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 23, 4/415-428, 2007 |
| P. Roca, F. Lopez-Almansa, J. Miquel, A. Hanganu |
| Limit analysis of reinforced masonry vaults |
| Engineering Structures, Vol. 29, pp. 431-439, 2007 |
| J.M. González, J. Miquel Canet, S. Oller, R. Miró |
| A viscoplastic constitutive model with strain rate variables for asphalt mixtures-numerical simulation |
| Computational Materials Science, Vol 38, 543-560, 2007 |
| A. Andreu, L. Gil y P. Roca |
| Computational Analysis of Masonry Structures with Funicular Model |
| Journal of Engineering Mechanics, Vol. 133, n. 4, pp. 473-480, 2007 |
| B. Suárez |
| La orientación profesional, la competencia y la universidad del siglo XXI |
| Revista de Obras Públicas, Vol. Nº 3.477, pp. 7-10, 2007 |
| E. Oñate, B. Suárez, J. Miquel |
| Avances en Mecánica de los Medios Continuos: Posibilidades de los Métodos Numéricos en Obras Subterráneas |
| Univ Valladolid. Serie Ingeniería, Vol. 15, pp. 195-210, 2007 |
| Aubry R., Idelsohn S. R. and Oñate E. |
| Fractional step like schemes for free surface problems with thermal coupling using the Lagrangian PFEM |
| Computational Mechanics, Vol. 38, Nos. 4-5, pp. 294-309, 2006 |
| Mora J., Otín R., Dadvand P. Escolano E., Pasenau Miguel A. and Oñate E. |
| Open tools for electromagnetic simulation programs |
| The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (Compel), Vol. 25, No. 3, pp. 551-564, 2006 |
| Löhner R., Yang C. and Oñate E. |
| Simulation of flows with violent free surface motion |
| Computer Methods in Applied Mechanics and Engineering,, Vol. 195, pp. 5597 - 5620, 2006 |
| Idelsohn S.R. and Oñate E. |
| To mesh or not to mesh. That is the question... |
| Computer Methods in Applied Mechanics and Engineering, Vol. 195, pp. 4681 - 4696, 2006 |
| Neamtu L. y Oñate E. |
| Un punto de vista sobre el uso de la simulación en la industria de estampación de chapa metálica |
| Deformación Metálica, Año nº 32, nº 287, pp. 40-45, 2006 |
| Oñate E., García J., Idelsohn S. R., and Del Pin F. |
| Finite calculus formulations for finite element analysis of incompressible flows. Eulerian, ALE and Lagrangian approaches |
| Computer Methods in Applied Mechanics and Engineering, Vol. 195, pp. 3001-3037, 2006 |
| Oñate E., Miquel J. and Hauke G. |
| Stabilized formulation for the advection-diffusion-absorption equation using finite calculus and linear finite elements |
| Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issues 33-36, pp. 3926-3946, 2006 |
| Recarey C., Oñate E., Miquel J., Rojek J., Zárate F. y Burrel S. |
| Simulación de problemas de desgaste, en la interacción herramienta de corte terreno, empleando el método de los elementos discretos |
| Ingeniería Civil, Nº 141, pp. 19 - 34, 2006 |
| Oñate E., Zárate F. and Idelsohn S. |
| Finite element formulation for convective-diffusive problems with sharp gradients using finite calculus, |
| Computer Methods in Applied Mechanics and Engineering, Vol. 1983, pp. 1793-1825, 2006 |
| Idelsohn S. R., Oñate E., Del Pin F. and Calvo N. |
| Fluid-structure interaction using the particle finite element method, |
| Computer Methods in Applied Mechanics and Engineering, Vol. 195, pp. 2100-2123, 2006 |
| Oñate E., Arteaga J., García Espinosa J. and Flores R. |
| Error estimation and mesh adaptivity in incompressible viscous flows using a residual power approach |
| Computer Methods in Applied Mechanics and Engineering, Vol. 195, pp. 339 362, 2006 |
| Valverde Q., Chiumenti M., Agelet de Saracibar C. and Cervera M. |
| Formulación estabilizada de elementos finitos triangulares y tetraédricos para problemas de incompresibilidad en grandes deformaciones |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol.22, nº3, pp.335-348, 2006 |
| Agelet de Saracibar C. , Chiumenti M., Valverde Q., Cervera M. |
| On the Orthogonal Subgrid Scale Pressure Stabilization of Finite Deformation J2 Plasticity |
| Computer Methods in Applied Mechanics and Engineering, Vol.195, pp. 1224-1251, 2005 |
| Codina R. and Badia S. |
| On some pressure segregation methods of fractional-step type for the finite element approximation of incompressible flow problems |
| Computer Methods in Applied Mechanics and Engineering, Vol. 195, 2900-2918, 2006 |
| Codina R. , Coppola-Owen H., Nithiarasu P. and Liu C. |
| Numerical comparison of CBS and SGS as stabilization techniques for the incompressible Navier-Stokes equations |
| International Journal for Numerical Methods in Engineering,, Vol. 66, 1672-1689, 2006 |
| Nithiarasu P., Codina R. and Zienkiewicz O.C. |
| The Characteristic Based Split (CBS) Scheme-A unified approach to fluid dynamics |
| International Journal for Numerical Methods in Engineering, Vol. 66, pp. 1514-1546, 2006 |
| Codina R. and Hernández N. |
| Stabilized finite element approximation of the stationary MHD equations |
| Computational Mechanics,, Vol. 38, 344-355, 2006 |
| Houzeaux G. and Codina R. |
| Finite Element Modeling of the Lost Foam Casting Process Tackling Back-Pressure Effects |
| International Journal of Numerical Methods for Heat & Fluid Flow,, Vol. 16, 573-589, 2006 |
| Codina R. |
| Analysis of a stabilized finite element approximation of the Oseen equations using orthogonal subscales |
| Applied Numerical Mathematics, Vol. 58, Nº 3, pp264-283, 2008 |
| Cervera M. y Chiumenti M. |
| Mesh objective tensile cracking via local continuum damage mechanics |
| Computer Methods in Appl. Mechanics and Eng., Vol. 196, on-line 2006 |
| Agelet de Saracibar C., Chiumenti M. y Cervera M. |
| Current developments on the coupled thermomecanical computational modeling of metal casting processes |
| Int. J. for Num. and Anal. Meth. in Geomechanics, Vol. 6, 1-11, 2006 |
| Cervera M. y Chiumenti M. |
| Smeared cracking: back to the original track |
| Int. J. for NUm. and Anal. Meth. in Geomechanics, Vol. 301, 1173-1199, 2006 |
| Bonett R.L., Barbat A. H., Pujades L.G., Lagomarsino S., Penna A. |
| Performance assessment for unreinforced masonry buildings in low seismic hazard areas |
| Revista Ingenierias, Vol. 5,nº008, pp.105-118, 2006 |
| Oller S and Barbat A.H. |
| moment-curvature damage model for bridges subjected to seismic loads |
| Computer methods in applied mechanics and Engineering, Vol. 195, pp. 4490-4511, 2006 |
| Barbat A.H., Pujades L.G. and Lantada N. |
| Performance of buildings under earthquakes in Barcelona, Spain |
| Computer-aided civil and infrastructure engineering, Vol. 21, 2006, 573-593 |
| Oliveira D.V., Lourenço P.B. y Roca P. |
| Cyclic behaviour of stone and brick masonry under uniaxial compressive loading |
| Materials and Structures, Vol. 39(2), pag. 219-227, 2006 |
| Andreu A., Gil L. and Roca P. |
| A new deformable catenary element for the analysis of cable net structures |
| Computers & Structures, Vol. 84 (29-30), pp 1882-1890, 2006 |
| Huerta A., Casafont M., Arnedo A., Roure F. and Rodríguez-Ferran A. |
| Experimental testing of joints for seismic design of lightweight structures. Part 2: Bolted joints in straps |
| Thin -Walled Structures, Vol 44 nº6, pag. 677-691, 2006 |
| Huerta A., Casafont M., Arnedo A., Roure F. and Rodríguez-Ferran A. |
| Experimental testing of joints for seismic design of lightweight structures. Part 1: screwed joints in straps |
| Thin -Walled Structures, Vol 44 nº 2, pag. 131-270, 2006 |
| Huerta A., Arroyo M. and Ortiz M. |
| Local maximum-entropy approximation schemes: A seamless bridge between finite elements and meshfree methods |
| International journal for numerical methods in engineering, Vol. 65, nº13, pp. 2167-2202, 2006 |
| Legrain G., Moes N. and Huerta A. |
| Étude de la stabilité d'une formulation incompressible traitée par X-FEM |
| European Journal of Computational Mechanics (Revue Européenne de Mécanique), Vol. 15, nº 1,2,3, pag. 257-268, 2006 |
| Roca X., Sarrate J. and Huerta A. |
| Mesh projection between parametric surfaces |
| Communications in numerical Methods in Engineering, Vol 22, nº 6, pp. 591-603, 2006 |
| Xuan Z.C., Pares N. and Peraire J. |
| Computing upper and lower bounds for the J-integral in two-dimensional linear elasticity |
| Computer methods in applied mechanics and engineering, Vol. 195, po. 430-443, 2006 |
| Pares N., Diez P. and Huerta A. |
| Subdomain-based flux-free a posteriori error estimator |
| Computer Methods in Applied Mechanics and Engineering, Vol 195, nº 4-6, pp.297-323, 2006 |
| Pares N., Bonet J., Huerta A.and Peraire J. |
| The computation of boounds for linear-functional outputs of weak solutions to the two-dimensional elasticity equations |
| Computer Methods in Applied Mechanics and Engineering, Vol. 195, nº4-6, pp. 406-429, 2006 |
| Janson L., Huerta A., Pijaudier-Cabot G. and Ghavamian S. |
| An elastic plastic damage formulation for concrete: application to elementary and structural tests |
| Computer Methods in Applied Mechanics and Engineering, Vol 195, nº52, pp. 7077-7092, 2006 |
| Guimaraes L.M., Gens A., Sánchez M. and Olivella S. |
| THM and reactive transport analysis of expansive clay barrier in radioactive waste isolation |
| Communications in numerical Methods in Engineering, Vol. 22, pp. 849-859, 2006 |
| Turmo J., Ramos G. y Aparicio A.C. |
| Shear strength of dry joints of concrete panels with and without steel fibres. Application to precast segmental bridges |
| Engineering Structures, Vol. 28/1, pp. 23-33, 2006 |
| Turmo J., Ramos J. y Aparicio A.C. |
| Resistencia de juntas secas conjugadas de puentes de dovelas prefabricadas de hormigón: propuesta para el Eurocógigo 2 |
| Materiales de Construcción, Instituto Eduardo Torroja, Vol. 56 nº 282, pag. 45-52, 2006 |
| Turmo J, Ramos G. y Aparicio A.C. |
| Shear behaviour of unbonded post-tensioned segmental beams with dry joints |
| ACI Structural Journal. American Concrete Institute, Vol. 103 nº 3, pag. 409-417, 2006 |
| Turmo J., Piernagorda J., Ramos G. y Aparicio A.C. |
| Comportamiento estructural de puentes de dovelas prefabricadas con pretensado exterior y junta seca. Primera parte: ensayos de vigas |
| Hormigón y Acero, Vol. 240, pag. 31-41, 2006 |
| Turmo J., Ramos G. y Aparicio A.C. |
| Comportamiento estructural de puentes de dovelas prefabricadas con pretensado exterior y junta seca. Segunda parte: Modelización de ensayos |
| Hormigón y Acero, Vol. 240, pp. 43-53, 2006 |
| Mozos del Olmo C. y Aparicio A.C. |
| Modelado de tableros celulares de almas inclinadas mediante emparrillado plano |
| Hormigón y Acero, Vol. 240, pp. 95-107, 2006 |
| Turmo J., Ramos G. y Aparicio A.C. |
| FEM modelling of unbonded post-tensioned segmental beams with dry joints |
| Engineering Structures, Vol. 28, pag. 1852-1863, 2006 |
| Casas J.R. and Pascual J. |
| Debonding of FRP in bending: simplified model and experimental validation |
| Construction and Buildings Materials, Vol. 21, Nº10, pp. 1940-1949, 2006 |
| Ramos G., Casas J.R. y Alarcon A. |
| Normalized test for prediction of debonding failure in concrete elements strengthened with CFRP |
| Journal of Composites for Construction, ASCE, Vol.10, nº6, pp.509-519, 2006 |
| Wisniewski D., Casas J.R. and Bien J. |
| Metody oceny niezawodnosci exksploatowanych mostów kilejowych |
| Inzynieria i budownictwo, Nº 7-8, pp. 378-384, 2006 |
| Wisniewski D., Casas J.R. and Ghosn M. |
| Load-capacity evaluation of existing railway bridges based on robustness quantification |
| Structural Engineering International, Vol.16, nº2,pp.161-166, 2006 |
| Jara M. and Casas J.R. |
| A direct displacement-based method for the seismic design of bridges on bi-linear isolation devices |
| Engineering Structures, Vol. 28, pp. 869-879, 2006 |
| Soriguera F., Robusté F., Juanola R. and López Pita A. |
| Handling equipment optimization in container terminal ofPort of Barcelona |
| Transportation Research Record, Vol. 1963, pp. 44-51, 2006 |
| Caicedo F., Robusté F. and López-Pita A. |
| Parking management and modeling of car park patron behavior in underground facilities |
| Transportation Research Record, Vol. 1956, pp. 60-67, 2006 |
| Arroyo M., Muir Wood D., Greening P., Medina L. and Rio J. |
| Effects of sample size on bender-based axial G0 measurements |
| Geòtechnique, Vol. 56, 1, pp. 39-52, 2006 |
| Arroyo M., Nova R. and Tsige M. |
| Microstructure and compactive instabilities of a stabilized residue |
| ASCE, J. of Materials in Civil Eng., Vol. 18, 2, pp. 272-282, 2006 |
| Brenner J., Jiménez A. and Sardá R. |
| Definition of homogeneous environmental management units for the catalan coast |
| Environmental Management, Vol. 38 (6), pp. 993-1005, 2006 |
| Mendoza E.T. and Jiménez J.A. |
| Storm-induced beach erosion potential in Catalonian coast |
| Journal of Coastal Research, SI 48: 41-48, 2006 |
| Jorda G., Bolaños R., Espino M. and Sáncez-Arcilla A. |
| Assessment of the importance of the current-wave coupling-wave coupling in the shelf ocean forecasts |
| Ocean Science Discussions, Vol. 3, pp. 1825-1870, 2006 |
| Comerma E., Espino M., Salazar M., Jerez F., Madrigal R. and Sánchez-Arcilla A. |
| CAMCAT: an oil spill forecasting system for the Catalan-Balearic Sea based on the MFS products |
| Ocean Science Discussions, Vol. 3, 5, pp. 1791-1823, 2006 |
| Valdemoro H.I. and Jiménez J.A. |
| The influence of shoreline dynamics on the use and exploitation of Mediterranean Tourist Beaches |
| Coastal Management, Vol. 34 (4), 405-423, 2006 |
| Cupul-Magaña L.A., Mosso-Aranda C., Sierra J.P., Marti E., Ferman-Almada J.L., Rodilla M., Gonzalez-del-Rio J. and Sánchez-Arcilla A. |
| Characterization and distribution patterns of surficial sediments of Cullera Bay, Spain |
| Ciencias Marinas, Vol. 32, Nº4, 617-629, 2006 |
| Teixeira P.F., López Pita A. et al. |
| Improvement in high-speed ballasted track design: beneficits ofbituminous subballast layers |
| Transportation Research record Journal of the Transportation, No 1943, pag.43-49, 2006 |
| López Pita et al. |
| Evolution of track geometry quality in high-speed lines: the 10-year experience of the Madrid-Seville line |
| Journal of Rail and Rapad Transit, Vol. 221, Number 2 / 2007 |
| Soriguera F., Robusté F., Juanola R. and López Pita A. |
| Optimization of the handling equipment in the container terminal of the port of Barcelona, Spain |
| Transportation Research Record Journal of the Transportation Research Board, Nº 1963, pp. 44-51, 2006 |
| Caicedo F., Robusté F. and López Pita A. |
| Parking management and modeling of car park. Patron behavior underground facilities |
| Journal of the Transportation Research Board no. 1956, Management and Public Policy, Nº 1956, pp. 60-67, 2006 |
| Ciancio D., Carol I. and Cuomo M. |
| On inter-element forces in the FEN-displacement formulation and implications for stress recovery |
| Int. J. Num. Methods in Engineering, Vol. 66 pp. 502-528, 2006 |
| Caner F. and Carol I. |
| Microplane constitutive model and computational framework for blood vessel tissue |
| J. Biomech. Engrg., Vol. 128 (3): 419-427, 2006 |
| Caballero A., López C.M. and Carol I. |
| 3D meso-structural analysis of concrete specimens under uniaxial tension |
| Comp. Meth. Appl. Mech. Engrg., Vol. 195 Nº52, pp. 7182-7195, 2006 |
| Caballero A., Carol I. and López C.M. |
| A meso-level approach for the 3D numerical analysis of cracking and fracture of concrete materials |
| fracture and Fatigue of Engineering Materials and Structures, Vol. 29: 979-991, 2006 |
| L. S. Nanía, M. Gómez and J. Dolz |
| Experimental studyy of the dividing flow in steep street crossings |
| Journal of Hydraulic Research FLUMEN, Vol. 42, nº 4, pp. 406-412, 2006 |
| Huespe A.E., Oliver J., M.D.G. Pulido, Blanco S. and Linero D. |
| On the fracture models determined by the continuum-strong discontinuity appoach. |
| International Journal of Fracture, Vol. 137, pp. 211-229, 2006 |
| Oliver J., Huespe A.E., and Sánchez P.J. |
| A comparative study on finite elements for capturing strong discontinuities: E-FEM vs. X-FEM |
| Computer Methods in Applied Mechanics and Engineering, Vol. 195, pp. 4732-4752, 2006 |
| Oliver J., Huespe A.E., Blanco S. and Linero D. |
| Stability and robustness issues in numerical modelling of material failure with the strong discontinuity approach. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 195, pp. 7093-7114, 2006 |
| Sánchez P.J., Sonzogni V., Huespe A.E. and Oliver J. |
| Stabilized mixed finite elements with embedded discontinuities for shear bans modelling. |
| Journal of Applied Mechanics-Transactions of the ASME, Vol. 73, pp. 995-1004, 2006 |
| M.D.G. Pulido y Oliver J. |
| Contribuciones a la simulación numérica del fallo material en deformaciones infinitesimales. Modelos de degradación y daño contínuo. |
| Revista Internacional de Métodos Numériicos para Cálculo y Diseño en Ingeniería, Vol. 22, Nº 3, pp. 299-334, 2006 |
| Oller S., Salomon O. and Oñate E. |
| A continuum mechanics model for mechanical fatigue analysis |
| Computational Materials Science, Vol. 32, pp. 175-195, 2005 |
| Flores F. and Oñate E. |
| Improvements in the membrane behaviour of the three node rotation-free BST shell triangle using an assumed strain approach |
| Computer Methods in Applied Mechanics and Engineering, Vol. 194, Issues 6-8, pp. 907-932, 2005 |
| Oller S., Miquel J. and Zalamea F. |
| Composite material Behavior using a homogenization double scale method. |
| Journal of Engineering Mechanics, Vol. 131, Nº. 1, pp. 65-79, 2005 |
| Nallim L., Oller S. and Grossi R. |
| Statical and dynamical behaviour of thin fibre reinforced composite laminates with different shapes. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 194, Nº 17, pp.1797-1822, 2005 |
| Flores F. y Oñate E. |
| Un elemento de lámina sin grados de libertad rotacionales para el análisis de cáscaras con quiebres y ramificadas |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 21, No. 4, pp. 385-411, 2005 |
| Recarey C., Oñate E., Rojek J., Miquel J., Zárate F., Cadoce G. y Labra C. |
| Modelación del ensayo brasileño empleando modelación discreta |
| Ingeniería Civil, Vol. 139, pp. 112 - 124, 2005 |
| Rossi R., Lazzari M., Vitaliani R. and Oñate E. |
| Simulation of light-weight membrane structures by wrinkling model |
| Int. Journal for Numerical Methods in Engineering, Vol. 62, Nº 15, pp. 2127-2153, 2005 |
| Oñate E. and Flores F. G. |
| Advances in the formulation of the rotation-free basic shell triangle |
| Computer Methods in Applied Mechanics and Engineering, Vol. 194, Issues 21-24, pp. 2406-2443, 2005 |
| Boroomand B., Tabatabaei A. A. and Oñate E. |
| Simple modifications for stabilization of the finite point method |
| Int. Journal for Numerical Methods in Engineering, Vol. 63, pp. 351-379, 2005 |
| Aubry R. , Idelsohn S.R. and Oñate E. |
| Particle finite element method in fluid-mechanics including thermal convection-diffusion |
| Computers and Structures, Vol. 83, Nº 17-18, pp 1459-1475, 2005 |
| Hurtado J., Zárate F. and Oñate E. |
| Reliability estimation of the sheet stamping process using support vector machines |
| International Journal of Vehicle Design, Vol. 39, Nº. 1/2, pp.110-124, 2005 |
| Valverde Q., Chiumenti M., Cervera M. , Agelet de Saracibar C. |
| Formulación estabilizada de elementos finitos triangulares y tetraédricos para problemas de incompresibilidad en deformaciones infinitesimales |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería,, Vol. 21, Nº4, pp 345-363, 2005 |
| Rojek J. , Zárate F., Agelet de Saracibar C. , Gilbourne C. and Verdot P. |
| Discrete element modelling and simulation of sand mould manufacture for the lost foam process |
| International Journal for Numerical Methods in Engineering, Vol. 62, pp. 1421-1441, 2005 |
| Coppola-Owen H. - and Codina R. |
| Improving Eulerian two-phase flow finite element approximation with discontinuous gradient pressure shape functions |
| International Journal for Numerical Methods in Fluids, Vol. 49, 1287-1304, 2005 |
| Guasch O. and Codina R. |
| An algebraic subgrid scale finite element method for the convected Helmholtz equation in two dimensions with applications in aeroacoustics |
| International Journal for Numerical Methods in Engineering,, Vol. 196, no45-48, pp. 4672-4689, 2007 |
| Badia S. and Codina R. |
| Convergence analysis of the FEM approximation of the first order Projection method for incompressible flows with and without the inf-sup condition |
| Numerische Mathematik,, Vol. 107, Nº 4, 533-557pp., 2007 |
| Codina R. i Guasch O. |
| Inestabilitats numèriques i turbulència: l'efecte de les subescales en mecànica de fluids |
| Butlletí de la Societat Catalana de Matemàtiques, Vol. 20, No. 2, 91-127, 2005 |
| Suárez B. |
| El espacio europeo de educación superior: Una visión desde un observatorio de privilegio |
| Revista de Obras Públicas, nº 3453 año 152 |
| Blanco. E., Gil Ll. |
| Estudio de sensibilidad geométrica del comportamiento tensional de una ménsula corta. |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 21, nº 2, pp 169-178, 2005 |
| Barbat A. H., Oller O. y Pujades L.G. |
| Conceptos de vulnerabilidad y ductilidad en el proyecto sismorresistente de edificios |
| Hormigón y Acero, Vol. 238, pp61-73, 2005 |
| Orosco L., Haarala M., Barbat A. H. |
| Generación de acelerogramas artificiales compatibles con la sismicidad local |
| Revista internacional de ingeniería de estructuras, pp. 21-48, 2005 |
| Vaunat J. and Gens A. |
| Analysis of the hydration of a bentonite seal in a deep radioactive waste repository |
| Engineering Geology, Vol. 81, nº 3, pp. 317-328, 2005 |
| Roca P., Molins C y Marí A.R. |
| Strength capacity of masonry wall structures by the equivalent frame method |
| Journal of structural Engineering ASCE, Vol. 131 (10), pp. 1601-1609, 2005 |
| Lourenço P.B., Oliveira D.V., Roca P. y Orduña A. |
| Dry joint stone masonry walls subjected to in-plane combined loading |
| Journal of structural Engineering ASCE, Vol 131(11), pp. 1665-1673, 2005 |
| Roca P. |
| Simplified models for the assessment of masonry shear walls |
| Construction and building materials, Vol. 20, pp.229-238, 2005 |
| Roca P. |
| Strumenti numerici per il progetto delle volta in muratura armata |
| Costruire in laterizio, Vol. 107, pp.64-65, 2005 |
| Pastor N.and Rodríguez-Ferran A. |
| Hysteretic modelling of x-braced shear walls |
| Thin-Walled Structures, Vol 43, nº 10, pp. 1567-1568, 2005 |
| Arroyo M. and Belytschko T. |
| Continuum mechanics modeling and simulation of carbon nanotubes |
| Meccanica, Vol 40, nº4-6, pp. 455-469, 2005 |
| Perez-Foguet A., Oliete-Jose S. and Sanz-Carranza A. |
| Development education and engineering: a framework for incorporating reality of developing countries into engineering studies |
| International journal of Sustainability in Higher Education, Vol 6,3, pp. 278-303, 2005 |
| Rodíguez-Ferran A., Morata I. and Huerta A. |
| A new damage model based on non local-displacements |
| International Journal for Numerical and analytical Methods in Geomechanics, Vol. 29, nº 5, pp. 473-493, 2005 |
| Wiberg N.-E and Díez P. |
| Preface |
| Computer Methods in Applied Mechanics and Engineering, Vol 195 nº 4-6, ,pp. 205-206, 2005 |
| Fernández-Mendez S., Bonet J. and Huerta A. |
| Continuous blending of SPH with finite elements |
| Computers and Structures, Vol 83, nº 17-18, pp. 1448-1458, 2005 |
| Olivella S. and Gens A. |
| Double structure THM analyses of a heating test in a fractured tuff incorporating intrinsic permeability variations |
| Int. Journal for Rock Mechanics and Mining Sciences, Vol. 42, pp. 667-679, 2005 |
| Sánchez M., Gens A., Guimaraes L.D. and Olivella S. |
| A double structure generalized plasticity model for expansive materials |
| Int. Journal for Numerical and analytical Methods in Geomechanics, Vol. 29, pp. 751-787, 2005 |
| Rutqvist J., Barr D., Datta R., Gens A., Millard A, Olivella S.,Tsang C-F. anf Tsang Y. |
| Coupled thermal-hydrological-mechanical analyses of the Yucca Mountain Drift Scale Test-Comparison of field measurements to predictions of four different numerical models |
| Int. Journal for rock Mechanics and Mining Sciences, Vol. 42, pp. 680-697, 2005 |
| Mata C., Guimaraes L.D., Ledesma A., Gens A. and Olivella S. |
| A hydro-geomechanical analysis of the saturation process with salt water of a bentonite crushed granite rocok mixture in an engineered nuclear barrier |
| Engineering Geology, Vol. 81, pp. 227-245, 2005 |
| Alonso E.E., Olivella S. and Pinyol N.M. |
| A review of beliche dam |
| Geotechnique, Vol. 55, nº4, pp. 267-285, 2005 |
| Arnedo D., Alonso E.E. y Olivella S. |
| Canales en terraplén sobre suelo natural y compactado |
| Ingeniería Civil, nº 139, pp. 68-80, 2005 |
| Turmo J., Ramos G. y Aparicio A.C. |
| Fem study the structural behaviour of segmental concrete bridges with unbonded prestressing and dry joints: Simple Supported Bridges |
| Engineering Structures, Vol. 27/11 pp. 1652-1661, 2005 |
| Turmo J., Polo T., Llopart, Ramos G. y Aparicio A.C. |
| Resistencia de juntas secas conjugadas de puentes de dovelas prefabricadas de hormigón "ensayos de paneles" |
| Cemento y Hormigón IECA, Vol. 879, pp. 44-54, 2005 |
| Turmo J., Ramos G. y Aparicio A.C. |
| Estudio numérico del comportamiento de juntas secas de puentes de dovelas prefabricadas |
| Ingeniería civil CEDEX, Vol. 139, pp. 7-17, 2005 |
| Turmo J, Ramos G. y Aparicio A.C. |
| Resistencia de juntas secas conjugadas de puentes de dovelas prefabricadas de hormigón: propuesta para el Eurocódigo 2 |
| Materiales de Construcción, Vol.296, 2005 |
| Aparicio A.C. y Ramos G. |
| Footbridge over the Sant Adria Marina in Barcelona, Spain |
| Proceedings of the Institution of Civil Engineers, Vol. 158, pag. 193-199, 2005 |
| Aparicio A.C. y Ramos G. |
| Pasarela peatonal en el Port Forum (Barcelona) |
| Quaderns d'estructures. Associació de Consultors d'Estructures, Vol. 21, pp. 37-44, 2005 |
| Campos Matos J, Casas J.R. and Figueiras J. |
| A new methodology for damage assessment of bridges through instrumentation: Application to the Sorraia river bridge |
| Structure and Infrastructure Engineering, Vol. 1, nº4,pp.239-252, 2005 |
| Pascual J. y Casas J.R. |
| Método simplificado de cálculo de la respuesta última de elementos de hormigón reforzados a flexión con materiales compuestos. Propuesta y verificación experimental |
| Hormigón y Acero, Vol 237, pp. 85-97, 2005 |
| López Pita A, Robusté F. et al. |
| Impact of high-speed lines in relation to very high frecuency Air Services |
| Journal of Public Transportation, Vol. 8:2, pp. 17-36, 2005 |
| Arroyo M., Castellanza R. and Nova R. |
| Compaction bands and oedometric tests in cemented soils |
| Soils & Foundations, Vol. 45,2, pp. 181-195, 2005 |
| Pereira L.C.C., Jiménez J.A., Koening M.L., Porto F.F., Medeiros C. and Da Costas R.M. |
| Effect of coastline properties and wastewater on plankton composition and distribution in a stressed environment on the North coast of Olinda-PE (Brazil) |
| Brazilian Archives of Biology and Technology, Vol. 48 Nº6, 1013-1026, 2005 |
| Lamberti A., Archetti R., Kramer M., Paphitis D., Mosso C.and Di Risio M. |
| European experience of low crested structures for coastal management |
| Coastal Engineering, Vol. 52 Nº 10-11, pp. 841-866, 2005 |
| Kramer M., Zanuttigh B., Van der Meer J.W., Vidal C. and Gironella F.X. |
| Laboratory experiments on low-crested breakwaters |
| Coastal Engineering, Vol. 52 (10-11). 867-885, 2005 |
| Johnson H.K., Karambas T.V., Avgeris I., Zanuttigh B., González-Marco D. and Cáceres I. |
| Modelling of waves and currents around subermeged breakwaters |
| Coastal Engineering, Vol. 52 (10-11): 949-969, 2005 |
| Cáceres I., Sánchez-Arcilla A., Zanuttigh B., Lamberti A. and Franco L. |
| Wave overtopping and induced currents at emerged low crested structures |
| Coastal Engineering, Vol. 52 (10-11): pp. 931-947, 2005 |
| Rodríguez A., Hillman G., Pagot M., Vionnet C., Sierra J.P. and Corral M. |
| Actualización del clima marítimo y simulación de propagación del oleaje de diseño para el puerto Caleta La Misión, Tierra del Fuego, Atlántico Sur, Argentina |
| Mecánica Computacional, Vol. XXIV: 193-206, 2005 |
| Delgado-González O., Lizárraga-Arciniega R., Martínez-Díaz de León A., Galindo-Bect L., Fermán-Almada J.L., Sánchez-Arcilla A., Mosso C., Pérez-Higuera R. y Cruz-Varela A. |
| Cambios en la posición de la línea de playa de la boca del Estero de Punta Banda, Baja California, durante 1972-2003 |
| Ciencias Marinas, Vol.31 Nº4 pp.707-717, 2005 |
| Rubio A., Arnau P.A., Espino M., Flexas M.M., Jordà G., Salat J., Puigdefàbregas J. and Sánchez-Arcilla A. |
| A field study of the behaviour of an anticyclonic eddy on the Catalan continental shelf (NW Mediterranean) |
| Progress in Oceanography, Vol. 66 (2-4): pp.142-156, 2005 |
| Guillén J., Jiménez J.A., Palanques A., Puig P. and Gracia V. |
| Bottom sediment variability in the active layer of the inner shelf off the Ebro delta |
| Journal of Coastal Research, Vol.21, pp. 482-496, 2005 |
| Koutandos E., Prinos P. and Gironella X. |
| Floating breakwaters under regular and irregular wave forcing: reflection and transmission characteristics |
| Journal of Hydraulic Research, Vol.438 (2), pp. 174-188, 2005 |
| Sierra J.P., Mösso C., Alsina J.M., Sánchez-Arcilla A. and Berdala E. |
| Modelado hidro-morfodinámico de una playa multibarrada longitudinalmente uniforme |
| Ingeniería Hidraulica, Vol. XX (2): pp. 19-35, 2005 |
| López Pita A. and Robusté F. |
| Impact of high-speed lines in relation to very high frecuency air services |
| Journal of Public Transportation, Vol. 8, nº2, 2005 |
| López Pita A. |
| Very high-speed track design and cost optimization in Spain |
| Railway Technical Review (RTR), Vol. 45, pp.8-12, 2005 |
| Garolera D., López C.M., Carol I. and Papanastasiou P. |
| Micromechanical analysis of the rock sanding problem |
| Journal of the Mechanical Behavior of Materials, Vol. 16 (1-2): 45-53, 2005 |
| J.C. Cante, Oliver J., González C., Calero J.A. and Benitez F. |
| On numerical simulation of powder compaction process: powder transfer modelling and characterisation. |
| Powder Metallurgy, Vol. 48, No. 1, pp. 85-92, 2005 |
| Houzeaux G. and Codina R. |
| A Dirichlet/Neumann domain decomposition method for incompressible turbulent flows on overlapping subdomains. |
| Computers & Fluids, Vol. 33, pp. 771-782, 2004 |
| Agüero A., J. R. Atienza y Oñate E. |
| Método aproximado para estimar el estado límite último en entramados metálicos esbeltos |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 20, Nº3, 277 - 295, 2004 |
| Oñate E. |
| Possibilities of finite calculus in computational mechanics |
| Int. Journal for Numerical Methods in Engineering, Vol. 60, pp. 255-281, 2004 |
| Hurtado J., Zárate F. and Oñate E. |
| Reliability estimation of the sheet stamping process using support vector machines |
| International Journal of Vehicle Design, Vol. 39, Nº 1-2, pp. 110 - 124, 2005 |
| García Espinosa J., Oñate E., Helmers J.B. y Chakkor M.R. |
| Análisis CFD del movimiento de balance de un portacontenedores |
| Revista de Ingeniería Naval, Nº. 814, 2004 , pags. 105-108, 2004 |
| Oñate E., Rojek J., Taylor R.L. and Zienkiewicz O.C. |
| Finite calculus formulation for incompressible solids using linear triangles and tetrahedra |
| Int. Journal for Numerical Methods in Engineering, Vol. 59, pp. 1473-1500, 2004 |
| Oñate E. and Rojek J. |
| Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems |
| Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issues 27-29, pp. 3087-3128, 2004 |
| Oñate E., Idelsohn S.R., Del Pin F. and Aubry R. |
| The particle finite element method. An overview |
| International Journal of Computational Methods, Vol. 1, No. 2, pp. 267 - 307, 2004 |
| Perazzo F., Miquel J. y Oñate E. |
| El método de puntos finitos para problemas de la dinámica de sólidos |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 20, Nº 3, pp. 235 - 246, 2004 |
| Felippa C. and Oñate E. |
| Volumetric constraint models for anisotropic elastic solids |
| Journal of Applied Mechanics, Vol. 71, nº 5, pp. 731-734, 2004 |
| Löhner R. and Oñate E. |
| A general advancing front technique for filling space with arbitrary objects |
| Int. Journal for Numerical Methods in Engineering, Vol. 61, pp. 1977-1991, 2004 |
| Oñate E. |
| El valor del cálculo en los sistemas de ayuda a la toma de decisiones en ingeniería |
| Revista de Obras Públicas, No. 3449, pp. 41-48, 2004 |
| Idelsohn S.R., Oñate E. and Del Pin F. |
| The particle finite element method: a powerful tool to solve incompressible flows with free-surfaces and breaking waves |
| Int. Journal for Numerical Methods in Engineering, Vol. 61, pp. 964-989, 2004 |
| Oñate E., Idelsohn S.R., Del Pin F. and Aubry R. |
| Possibilities of the particle finite element method for fluid-structure interaction problems with free surface waves |
| Revue Européenne des Éléments finis, Vol. 13, pp. 637-666, 2004 |
| Codina R. and Folch A. |
| A stabilized finite element predictor-corrector scheme for the incompressible Navier-Stokes equations using a nodal based implementation. |
| International Journal for Numerical Methods in Fluids, Vol. 44, pp. 483-503, 2004 |
| Codina R. and Soto O. |
| Approximation of the incompressible Navier-Stokes equations using orthogonal-subscale stabilization and pressure segregation on anisotropic finite element meshes. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 193, pp. 1403-1419, 2004 |
| Houzeaux G. and Codina R. |
| A Finite Element Model for the Simulation of Lost Foam Casting. |
| International Journal for Numerical Methods in Fluids, Vol. 46, pp. 203-226, 2004 |
| Blasco J. and Codina R. |
| Error estimates for a viscosity splitting, finite element method for the incompressible Naver-Stokes equations. |
| Applied Numerical Mathematics, Vol. 51, pp. 1-17, 2004 |
| Cervera M., Chiumenti M. and Agelet de Saracibar C. |
| Softening, localization and stabilization: capture of discontinuous solution in J2 plasticity |
| International journal for Numerical and Analysis Methods in Geomechanics, Vol. 28, pp. 373-393, 2004 |
| Cervera M., Chiumenti M. and Agelet de Saracibar C. |
| Shear band localization via local J2 continuum damage mechanics. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 193, pp. 849-880, 2004 |
| Chiumenti M., Valverde Q., Agelet de Saracibar C. and Cervera M. |
| A stabilized formulation for incompressible plasticity using linear triangles and tetrahedra. |
| International Journal of Plasticity, Vol. 20, pp. 1487-1504, 2004 |
| Soberón C., Oller S. y Barbat A. |
| Evaluación del daño sísmico en puentes de hormigón armado. |
| Hormigón y Acero, Vol. 231, pp. 63-74, 2004 |
| Oller S., Barbat A. y Miquel J. |
| Estudio numérico del comportamiento de los hormigones reforzados con fibras cortas. |
| Hormigón y Acero, Vol. 232, pp. 113-123, 2004 |
| Oliver J., Huespe A.E., Pulido M.D.G. and Blanco S. |
| Computational modelling of cracking of concrete in strong discontinuity settings. |
| Computers & Concrete, Vol. 1, Nº. 1, pp. 61-76, 2004 |
| Oliver J. and Huespe A.E. |
| Theoretical and computational issues in modeling material failure in strong discontinuity scenarios. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 193, pp. 2987-3014, 2004 |
| Faria R., Oliver J. and Huespe A.E. |
| Continuum approach to material failure in strong discontinuity settins. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 193, pp. 3195-3220, 2004 |
| Oliver J., Huespe A.E. Samaniego E. and Chaves E. |
| Continuum apporach to the numerical simulation of material failure in concrete. |
| International Journal for Numerical and Analytical Methods in Geomechanics., Vol. 28, pp. 609-632, 2004 |
| Faria R., Oliver J. and Cervera M. |
| Modelling material failure in concrete structures under cyclic actions. |
| Journal of Structural Engineering-Asce, Vol. 130, Nº. 12, pp. 1997-2005, 2004 |
| Moreno González R., Bairán J.M., Pujades L., Aparicio A.C. y Barbat A.H. |
| Evaluación probabilista del comportamiento sísmico de edificios porticados de hormigón armado. |
| Hormigón y Acero, pp. 125-136, 2004 |
| Ruiz Sibaja A., Oller S. y Barbat A.H. |
| Una metodología para estimación de daño por fatiga: aplicación a plataformas marinas de acero. |
| Revista Internacional de Ingeniería de Estructuras, Vol. 9, nº 1, pp. 1-17, 2004 |
| Gil Ll., Andreu A. and Blanco E. |
| Integration methodology of different software tools for constrained optimization of structures. |
| Computers and Structures, Nº 82, pp.1639-1647, 2004 |
| Houzeaux G. and Codina R. |
| An overlapping iteration-by-subdomain Dirichlet/Robin domain decomposition method for advection-diffusion problems. |
| Journal of Computational and Applied Mathematics, Vol. 158, pp. 243-276, 2003 |
| García Espinosa J. and Oñate E. |
| An unstructured finite element solver for ship hydrodynamics problems |
| Journal of Applied Mechanics, Vol. 70, pp. 18 - 26, 2003 |
| Idelsohn S. R., Oñate E. and Del Pin F. |
| A Lagrangian meshless finite element method applied to fluid-structure interaction problems |
| Computers and Structures, Vol. 81, pp. 655 - 671, 2003 |
| Idelsohn S.R., Calvo N. and Oñate E. |
| Polyhedrization of an arbitrary 3D point set |
| Computer Methods in Applied Mechanics and Engineering, Vol. 192, Nos. 22-24, pp. 2649 - 2667, 2003 |
| Tschöpe H., Oñate E. and Wriggers P. |
| Direct computation of instability points for contact problems |
| Computational Mechanics, Vol. 31, No. 1-2, pp. 173-178, 2003 |
| Oñate E. |
| Multiscale computational analysis in mechanics using finite calculus: an introduction |
| Computer Methods in Applied Mechanics and Engineering, Vol. 192, Nos. 28-30, pp. 3043 - 3059, 2003 |
| Felippa C. A. and Oñate E. |
| Stress, strain and energy splittings for anisotropic elastic solids under volumetric constraints |
| Computers and Structures, Vol. 81, pp. 1343 - 1357, 2003 |
| Oñate E., Taylor R.L., Zienkiewicz O. C., and Rojek J. |
| A residual correction method based on finite calculus |
| Engineering Computations, Vol. 20, No. 5/6, pp. 629 - 658, 2003 |
| Tschöpe H., Wriggers P. and Oñate E. |
| Direct computation of instability points with inequality constraints using the FEM |
| Engineering Computations, Vol. 20, No. 5/6, pp. 611- 628, 2003 |
| Calvo N., Idelsohn S.R. and Oñate E. |
| The extended Delaunay tessellation |
| Engineering Computations, Vol. 20, No. 5/6, pp. 583- 600, 2003 |
| Idelsohn S.R., Oñate E., Calvo N. and Del Pin F. |
| The meshless finite element method |
| Int. Journal for Numerical Methods in Engineering, Vol. 58, pp. 893- 912, 2003 |
| Houzeaux G. and Codina R. |
| A Chimera method based on a Dirichlet/Neumann (Robin) coupling for the Navier-Stokes equations. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 192, pp. 3343-3377, 2003 |
| Folch A., Principe J. and Codina R. |
| Wind loading on ghe Great Belf Bridge |
| The QNET-CFD Network Newsletter, Vol. 2, Nº 2, pp. 26-29, 2003 |
| Cervera M., Chiumenti M., Valverde Q. and Agelet de Saracibar C. |
| Mixed Linear/linear Simplicial Elements for Imcompressible Elasticity and Plasticity. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 192, pp. 5249-5263, 2003 |
| Oller S., Car E. and Lubliner J. |
| Definition of a general implicit orthotropic yield creterion. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 192, Nos. 7-8 pp. 895-912, 2003 |
| Luccioni B. and Oller S. |
| A directional damage model. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 192, Nos. 9-10 pp. 1119-1145, 2003 |
| Oliver J., Huespe A.E., Pulido M.D.G. and Samaniego E. |
| On the strong discontinuity approach in finite deformation settings. |
| Int. Journal for Numerical Methods in Engineering, Vol. 56, pp. 1051-108, 2003 |
| Oliver J., Huespe A.E. and Samaniego E. |
| A study on finite elements for capturing strong discontinuities. |
| Int. Journal for Numerical Methods in Engineering, Vol. 56, pp. 2135-2161, 2003 |
| Bonett R., Penna A., Lagomarsino S., Barbat A.H., Pujades L. y Moreo R. |
| Evaluación de la vulnerabilidad sísmica de un edificio típico de la Eixample de Barcelona, España. |
| Revista Internacional de Ingeniería en Estructuras, Vol. 8, pp. 91-120, 2003 |
| Suárez B., Oñate E. y Ribó R. |
| Las herramientas numéricas y la práctica profesional en la ingeniería civil |
| Revista de Obras Públicas, No. 3418, pp. 7 - 15, 2002 |
| Löhner R., Sacco C., Oñate E. and Idelsohn S. |
| A finite point method for compressible flow |
| Int. Journal for Numerical Methods in Engineering, Vol. 53, pp. 1765 - 1779, 2002 |
| Car E., Zalamea F., Oller S., Miquel J. and Oñate E. |
| Numerical simulation of fiber reinforced composite materials - two procedures |
| Int. Journal of Solids and Structures, Vol. 39, pp. 1967 - 1986, 2002 |
| Oñate E., Cendoya P. and Miquel J. |
| Non-linear explicit dynamic analysis of shells using the BST rotation-free triangle |
| Engineering Computations, Vol. 19, No. 6, pp. 662-706, 2002. |
| Hanganu A.D., Oñate E., Barbat A.H. |
| A finite element methodology for local/global damage evaluation in civil engineering structures |
| Computers and Structures, Vol. 80, Nos. 20-21, 2002 |
| Salomón O, Oller S. and Oñate E. |
| Fatigue analysis of materials and structures using a continuum damage model |
| International Journal of Forming Processes, Vol. 5 Nos. 2-3-4, pp 493-503, 2002 |
| Ribó R., Bugeda G. and Oñate E. |
| Some algorithms to correct a geometry in order to create a finite element mesh |
| Computers and Structures, Vol. 80, pp. 1399 - 1408, 2002 |
| D'Elía J., Storti M., Oñate E. and Idelsohn S.R. |
| A Lagrangian panel method in the time domain for moving free-surface potential flows |
| International Journal of Computational Fluid Dynamics, Vol. 16 (4), pp. 263 - 275, 2002 |
| Codina R. and Zienkiewicz O.C. |
| CBS versus GLS stabilization of the incompressible Navier-Stokes equations and the role of the time step as stabilization parameter. |
| Communications in Numerical Methods in Engineering, Vol. 18, Issue 2, pp. 99-112, 2002 |
| Codina R. and Blasco J. |
| Analysis of a stabilized finite element approximation of the transient convection-di usion-reaction equation using orthogonal subscales. |
| Computing and Visualization in Science, Vol. 4, Issue 3, pp. 167-174, 2002 |
| Codina R. and Soto O. |
| A numerical model to track two-fluid interfaces based on a stabilized finite element method and the level set technique. |
| International Journal for Numerical Methods in Fluids, Vol. 4, Issue 1-2, pp. 293-301, 2002 |
| Codina R. |
| Stabilized finite element approximation of transient incompressible flows using orthogonal subscales. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 191, pp. 4295-4321, 2002 |
| Suárez B., Hanganu A. and Miquel J. |
| Optimum design of multicellular reinforced concrete box docks. |
| Journal of Structural Engineering, Vol. 128, Nº. 5, pp. 603-611, 2002 |
| Chiumenti M., Valverde Q. and Agelet de Saracibar C. and Cervera M., |
| A stabilized formulation for incompresible elasticity using linear displacement and presure interpolations. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 191, pp. 5253-5264, 2002 |
| Cervera M., Faria R., Oliver J. and Prato T. |
| Numerical modelling of concrete curing, regarding hydration and temperature phenomena. |
| Computers and Structures, Vol. 80, pp. 1511-1521, 2002 |
| Soberón C., Oller S. y Barbat A. |
| Análisis de la vulnerabilidad sísmica del puente Warth mediante un método simplificado de estimación del daño. |
| Revista Internacional de Ingeniería de Estructuras, Vol. 7, nº 1, pp. 21-46, 2002 |
| Soberón C., Oller S. y Barbat A. |
| Evaluación del daño sísmico en puentes de hormigón armado. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 18, No. 2, pp. 309-329, 2002 |
| Soberón C., Oller S. y Barbat A. |
| Evaluación de la vulnerabilidad del puente Warth en Austria. |
| Revista Internacional de Desastres Naturales, Accidentes e Infraestructura Civil, Vo.. 2, Nº 1, pp. 3-18, 2002 |
| Soberón C., Oller S. y Barbat A. |
| Evaluación de la vulnerabilidad sísmica del puente Warth (Austria) mediante un modelo simplificado. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 18, Nº. 3, pp. 433-453, 2002 |
| Oller S. y Oñate E. |
| Predicción de vida en estructuras. Una breve reseña. |
| ACE - Applied Computing NEWS, Vol. 1, Nº. 2, pp. 7-13, 2002 |
| Bugeda G. |
| A comparison between new adaptive remeshing strategies based on point wise error estimation and energy norm error estimation. |
| Communications in Numerical Methods in Engineering , Vol. 18, pp. 469-482, 2002 |
| Soberón C., Oller S. y Barbat A. |
| Evaluación del daño sísmico en puentes de hormigón armado. |
| Revista Internacional de Ingeniería de Estructuras, Vol. 18, pp. 309-329, 2002 |
| Scotta R., Vitaliani R., Saetta A., Oñate E. and Hanganu A. |
| A scalar damage model with a shear retention factor for the analysis of reinforced concrete structures: theory and validation |
| Computers and Structures, Vol. 79, pp. 737-755, 2001 |
| Oñate E., Tschöpe H. and Wriggers P. |
| Combination of the critical displacement method with a damage model for structural instability analysis |
| Engineering Computations, Vol. 18, No. 3/4, pp. 642-662, 2001 |
| López Rodríguez M., García Espinosa J. y Oñate E. |
| Optimización de embarcaciones de recreo mediante la utilización de un código CFD |
| Ingeniería Naval, No. 784, pp. 122-130, 2001 |
| Car E., Oller S. and Oñate E. |
| A large strain plasticity model for anisotropic materials - composite material application |
| International Journal of Plasticity, No. 17, pp. 1437-1463, 2001 |
| Idelsohn S., Storti M. and Oñate E. |
| Lagrangian formulations to solve free surface incompressible inviscid fluid flows |
| Computer Methods in Applied Mechanics and Engineering, Vol. 191, Issue 6-7, pp. 583-593, 2001 |
| Oñate E. and García J. |
| A finite element method for fluid-structure interaction with surface waves using a finite calculus formulation |
| Computer Methods in Applied Mechanics and Engineering, Vol. 191, Issue 6-7, pp. 635-660, 2001 |
| Flores F.G. and Oñate E. |
| A basic thin shell triangle with only translational DOFs for large strain plasticity |
| Int. Journal for Numerical Methods in Engineering, Vol. 51, pp. 57-83, 2001 |
| Oñate E., Perazzo F. and Miquel J. |
| A finite point method for elasticity problems |
| Computers and Structures, Vol. 79, Num. 22-25, pp.2151 - 2163, 2001 |
| Rojek J., O.C. Zienkiewicz, Oñate E. and Postek E. |
| Advances in FE explicit formulation for simulation of metalforming processes |
| Journal of Materials Processing Technology, No. 119, pp. 41-47, 2001 |
| Codina R. |
| A stabilized finite element method for generalized stationary incompressible flows. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 190, Issue 20-21, pp. 2681-2706, 2001 |
| Houzeaux G. and Codina R. |
| Transmission conditions with constraints in finite element domain decomposition methods for flow problems. |
| Communications in Numerical Methods in Engineering, Vol. 17, Issue 3, pp. 179-190, 2001 |
| Codina R. |
| Pressure stability in fractional step finite element methods for incompressible flows. |
| Journal of Computational Physics, Vol. 170, Issue 1, pp. 112-140, 2001 |
| Folch A, Martí J. and Codina R. |
| Numerical modelling of magma withdrawal during caldera-forming eruptions. |
| Journal of Geophysical Research, Vol. 106, N. B8, pp. 16163-16175, 2001 |
| Codina R., BlascoJ. , Buscaglia G.C. and Huerta A. |
| Implementation of a stabilized finite element formulation for the incompressible Navier-Stokes equations based on a pressure gradient projection. |
| International Journal for Numerical Methods in Fluids, Vol. 37, Issue 4, pp. 419-444, 2001 |
| Blasco J. and Codina R. |
| Space and time error estimates for a first order, pressure stabilized finite element method for the incompressible Navier-Stokes equations. |
| Applied Numerical Mathematics, Vol. 38, N. B8, pp. 16163-16175, 2001 |
| Agelet de Saracibar C. , Cervera M. and Chiumenti M. |
| On the constitutive modeling of coupled thermoplastic phase-change problems. |
| International Journal of Plasticity, Vol. 17, pp. 1565-1622, 2001 |
| Car E., Oller S. y Oñate E. |
| Estudio de la adherencia en materiales compuestos reforzados con fibras. Aplicación a hormigón armado. |
| Revista Internacional de Ingeniería de Estructuras, Vol. 6, nº 1, pp. 45-57, 2001 |
| Gil, Ll., Bugeda, G. |
| A C++ Object-oriented programming strategy for the implementation of the finite element sensitivity analysis for a non-linear structural material model. |
| Advances in Engineering Software, Vol. 32, pp. 927-935, 2001 |
| Oliver J., Huespe A.E., Pulido M.D.G. and Chaves E. |
| From continuum mechanics to fracture mechancis: the strong discontinuity approach. |
| Int. Journal of Engineering Fracture Mechanics, Vol. 69, No. 2, pp. 113-136, 2001 |
| Agelet de Saracibar C. |
| La Escuela de Ingenieros de Caminos de Barcelona: Una referencia internacional en I+D+I. |
| CAUCE 2000, Vol. 104 pp. 72-80, 2001 |
| Agelet de Saracibar C. and Cervera M. |
| Special issue on computational modeling of forming problems. |
| International Journal of Plasticity, Vol. 17/12, 2001 |
| Codina R. |
| On stabilized finite element methods for linear systems of convection-di usion-reaction equations. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 188, Nos. 3-4, pp. 61-82, 2000 |
| Chiandussi G., Bugeda G. and Oñate E. |
| A simple method for automatic update of finite element meshes |
| Communications in Numerical Methods in Engineering, Vol. 16, pp. 1 - 19, 2000 |
| Car E., Oller S. and Oñate E. |
| An anisotropic elastoplastic constitutive model for large strain analysis of fiber reinforced composite materials |
| Computer Methods in Applied Mechanics and Engineering, Vol. 185, pp. 245-277, 2000 |
| Oñate E., Sacco C. and Idelsohn S. |
| A finite point method for incompressible flow problems |
| Computing and Visualization in Science, Vol. 3, pp. 67-75, 2000 |
| Oñate E. |
| Desarrollos y aplicaciones de modelos de fractura en la Escuela de Ingenieros de Caminos de Barcelona |
| Anales de Mecánica de la Fractura, Vol. 17, pp. 127-154, 2000 |
| Oñate E. and Zárate F. |
| Rotation-free triangular plate and shell elements |
| Int. Journal for Numerical Methods in Engineering, Vol. 47, pp. 557-603, 2000 |
| Oñate E. |
| A stabilized finite element method for incompressible viscous flows using a finite increment calculus formulation |
| Computer Methods in Applied Mechanics and Engineering, Vol. 182, pp. 355-370, 2000 |
| Chiandussi G., Bugeda G. and Oñate E. |
| Shape variable definition with C0, C1 and C2 continuity functions |
| Computer Methods in Applied Mechanics and Engineering, Vol. 188, pp. 727-742, 2000 |
| Codina R., Morton C., Oñate E. and Soto O. |
| Numerical aerodynamic analysis of large buildings using a finite element model with application to a telescope building |
| Int. Journal of Numerical Methods for Heat and Fluid Flow, Vol. 10, No. 6, pp. 616-633, 2000 |
| Gustavo C. Buscaglia, Fernando G. Basombr´ýo and Ramon Codina |
| Fourier analysis of an equal-order incompressible flow solver stabilized by pressure-gradient projection. |
| International Journal for Numerical Methods in Fluids, Vol. 34, Issue 1, pp. 65-92, 2000 |
| Codina R. |
| Stabilization of incompressibility and convection through orthogonal sub-scales in finite element methods. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 190, Issue 13-14, pp. 1579-1599, 2000 |
| Codina R. and Blasco J. |
| Stabilized finite element method for the transient Navier-Stokes equations based on a pressure gradient projecction. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 182, Nos. 3-4, pp. 277-300, 2000 |
| Codina R. |
| A nodal-based implementation of a stabilized finite element method for incompressible flow problems. |
| International Journal for Numerical Methods in Fluids, Vol. 33, Issue 5, pp. 737-766, 2000 |
| López Pita A. y Miquel J. |
| Utilización de amortiguadores y conectores sísmicos en puentes. |
| Hormigón y Acero, No. 217, pp. 81-100, 2000 |
| Cervera M., Oliver J. and Prato T. |
| Simulation of the contruction of RCC dams. I: Temperature and Aging. Ii: Stress and Damage. |
| Journal of Structural Engineering, 126, pp. 1053-1061, 2000 |
| Salomón O., Oller S. y Barbat A. |
| Simulación numérica de elastómetros multi-fase en estiramientos principales. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 16, No. 1, pp. 115-144, 2000 |
| Armero F. and Oller S. |
| A general framework for continuum damage models. Part I: Infinitesimal plastic damage models in strees space. |
| Int. Journal of Solids and Structures, Vol. 37, Nº. 48-50, pp. 7409-7436, 2000 |
| Armero F. and Oller S. |
| A general framework for continuum damage models. Part II: Integration algorithms, with applications to the numerical simulation of porous metals. |
| Int. Journal of Solids and Structures, Vol. 37, Nº. 48-50, pp. 7437-7464, 2000 |
| Salomón O., Oller S. y Barbat A. |
| Análisis sísmico de edificios con dispositivos de aislamiento de base elastoméricos. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 16, No. 2, pp. 281-304, 2000 |
| Oliver J. |
| On the discrete constitutive models induced by strong discontinuity kinematics and continuum constitutive equations. |
| Int. Journal of Solids and Structures, Vol. 37, pp. 7207-7229, 2000 |
| Cervera M., Oliver J. and Prato T. |
| Simulation of construction of RCC Dams. I: Temperature and Aging. |
| Journal of Structural Engineering-Asce, Vol. 126, pp. 1053-1061, 2000 |
| Cervera M., Oliver J. and Prato T. |
| Simulation of construction of RCC Dams. II: Strees and Damage. |
| Journal of Structural Engineering-Asce, Vol. 126, pp. 1062-1069, 2000 |
| Hurtado J. y Barbat A.H. |
| Equivalent linearization of the Bouc-Wen hysteretic model |
| Engineering Structures, Vol. 22, pp. 1121-1132, 2000 |
| Cardona O.D. y Barbat A.H. |
| El terremoto de Kocaeli, Turquía, de 17 de agosto de 1999. |
| Revista Internacional de Ingeniería de Estructuras, Vol. 5, Nº. 1, pp. 23-48, 2000 |
| Gil Ll., Blanco E. and Aulí J.M. |
| The virtual laboratory concept applied to strain measurements. |
| European Journal of Engineering Education, Vol. 25, Nº 3, pp. 243-255, 2000 |
| Botello S., Miquel J. and Oñate E. |
| A layer-wise triangle for analysis of laminated composites, plates and shells |
| Computers and Structures, Vol. 70, No. 6, pp. 647-666, February 1999 |
| Bugeda G. and Oñate E. |
| Optimum aerodynamic shape design for fluid flow problems including mesh adaptivity |
| International Journal for Numerical Methods in Fluids, Vol. 30, pp. 161-178, 1999 |
| Idelsohn S.R., Oñate E. and Sacco C. |
| Finite element solution of free-surface ship-wave problems |
| Int. Journal for Numerical Methods in Engineering, Vol. 45, No. 5, pp. 503-528, 1999 |
| Botello S., Marroquin J. L., Oñate E. and Van Horebeek J. |
| Solving structural optimization problems with genetic algorithms and simulated annealing |
| Int. Journal for Numerical Methods in Engineering, Vol. 45, No. 5, pp. 1069-1084, 1999 |
| Cruchaga M. A. and Oñate E. |
| A generalized streamline finite element approach for the analysis of incompressible flow problems including moving surfaces |
| Computer Methods in Applied Mechanics and Engineering, Vol. 173, Nos. 1-2, pp. 241-255, 1999 |
| Oñate E. and Manzan M. |
| A general procedure for deriving stabilized space-time finite element methods for advective-diffusive problems |
| International Journal for Numerical Methods in Fluids, Vol. 31, pp. 203 - 221, 1999 |
| Lopez J., Oller S., Oñate E. and Lubliner J. |
| A homogeneous constitutive model for masonry |
| Int. Journal for Numerical Methods in Engineering, Vol. 46, pp. 1651 - 1671, 1999 |
| Botello S., Marroquín J.L. y Oñate E. |
| Un modelo de optimización estocástica aplicado a la optimización de estructuras de barras prismáticas |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 15, Nº 4, pp. 425 - 434, 1999 |
| Blanco E., Gil Ll. Suárez B. y Oñate E. |
| Experiencias en la enseñanza asistida por ordenador de métodos numéricos para cálculo de estructuras |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 15, Nº 2, pp. 297 - 306, 1999 |
| Codina R. and Soto O. |
| Finite element implementation of two-equation and algebraic stress turbulence models for steady incompressible flows. |
| International Journal for Numerical Methods in Fluids, Vol. 30, pp. 309-334, 1999 |
| O.C. Zienkiewicz, P. Nithiarasu, R. Codina, M. V´azquez and P. Ortiz. |
| The characteristic based split (CBS) procedure: An ecient and accurate algorithm for fluid problems |
| International Journal for Numerical Methods in Fluids, Vol. 31, pp. 359-392, 1999 |
| Codina R. and Soto O. |
| Finite element simulation of the filling of thin moulds. |
| Int. Journal for Numerical Methods in Engineering, Vol. 46, Issue 9, pp. 1559-1573, 1999 |
| Codina R. |
| Numerical solution of the incompressible Navier-Stokes equations with Coriolis forces based on the discretion of the local time derivative. |
| Journal of Computational Physics, Vol. 148, pp. 467-496, 1999 |
| Folch A., Vázquez M., Codina R. and Martí J. |
| A fractional step finite element method for the Navier-Stokes equations applied to magma chamber withdrawal. |
| Computers & Geosciences, Vol. 25, pp. 263-275, 1999 |
| Cervera M., Agelet de Saracibar C. and Chiumenti M. |
| Thermo-mechanical analysis of industrial solidification processes. |
| International journal for Numerical and Analysis Methods in Geomechanics, Vol. 45, pp. 1575-1591, 1999 |
| Cervera M., Oliver J and Prato T. |
| Thermo-Chemo-Mechanical model for concrete. I: Hydration and Aging. II: Damage and Creep. |
| Journal of Engineering Mechanics, Vol.125, pp. 1018-1027, 1999 |
| Oller S. y Suero A. |
| Tratamiento del fenómeno de fatiga isotérmica mediante la mecánica de medios continuos. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 15, No. 1, pp. 3-29, 1999 |
| Rubert J., Oller S., Las Casas E. B., Proença S. and Oñate E. |
| A large strain Explicit formulation for composites. |
| Int. Journal for Numerical Methods in Engineering, Vol. 46, No. 10, pp.1595-1607, 1999 |
| Salomón O., Oller S. and Barbat S. |
| Finite element analysis of base isolated buildings sibjected to earthquake load. |
| Int. Journal for Numerical Methods in Engineering, Vol. 46, No. 10, pp.1741-1761, 1999 |
| Bugeda G., Gil L. and Oñate E. |
| Structural shape sensibility analysis for nonlinear material models with strain softening. |
| Structural Optimization, Vol. 17, pp.162-171, 1999 |
| Bugeda G. and Gil Ll. |
| Shape sensibility analysis for structural problems with non-linear material behaviour. |
| Int. Journal for Numerical Methods in Engineering, Vol. 46, pp.1385-1404, 1999 |
| Oliver J., Cervera M. and Manzoli O. |
| Strong discontinuities and continuum plasticity models: the strong discontinuity approach. |
| International Journal of Plasticity, No. 3, pp. 319-351, 1999 |
| Cervera M., Oliver J. and Prato T. |
| Thermo-chemo mechanical model of concrete. I: Hydation and Aging. |
| Journal of Engineering Mechanics-Asce, Vol. 125, pp.1018-1027, 1999 |
| Cervera M., Oliver J. and Prato T. |
| Thermo-chemo mechanical model of concrete. II: Damage and Creep. |
| Journal of Engineering Mechanics-Asce, Vol. 125, pp. 1028-1039, 1999 |
| Agelet de Saracibar C., Cervera M. and Chiumenti M. |
| On the formulation of coupled thermoplastic problems with phase-change. |
| International Journal of Plasticity, Vol. 15, pp. 1-34, 1999 |
| Agelet de Saracibar C. and Chiumenti M. |
| On the numerical modelling of frictional wear phenomena. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 117, pp. 401-426, 1999 |
| Marczyk J., Rodellar J. and Barbat A.H. |
| Dynamic system charcterization via eigenvalue orbits. |
| Journal of Guidance Control and Dynamics, Vol. 22, pp. 1-8, 1999 |
| Barbat A.H y Cardona O.D. |
| Daños estructurales producidos por el terremoto de Kocaeli, Turquía, del 17 de agosto de 1999. |
| Hormigón y Acero, Vol. 214, pp. 103-121, 1999 |
| Barbat A.H., Cervera M., Hanganu A., Cirauqui C. and Oñate E. |
| Failure pressure evaluation of the containment building of a large dry nuclear power plant |
| Nuclear Engineering and Design, Vol. 180, pp. 251-270, 1998 |
| Rojek J., Oñate E. and Postek E. |
| Application of explicit FE codes to simulation of sheet and bulk forming processes |
| Journal of Materials Processing Technology, Vols. 80-81, pp. 620-627, 1998 |
| Gil Ll., Bugeda G. y Oñate E. |
| Análisis de sensibilidad de formas en problemas estructurales con comportamiento no lineal del material |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14, 3, pp. 403 - 420, 1998 |
| Morán A., Oñate E. and Miquel J. |
| A general procedure for deriving symmetric expressions for the secant and tangent stiffness matrices in finite element analysis |
| Int. Journal for Numerical Methods in Engineering, Vol. 42, pp. 219-236, 1998 |
| Oñate E. |
| Derivation of stabilized equations for numerical solution of advective-diffusive transport and fluid flow problems |
| Computer Methods in Applied Mechanics and Engineering, Vol. 151, pp. 233-265, 1998 |
| Rojek J., Jovicevic J. and Oñate E. |
| Industrial applications of sheet-stamping simulation using new finite element models |
| Computer Modeling and Simulation in Engineering, Vol. 3, No. 3, pp. 147-152, 1998 |
| Oñate E. and Idelsohn S. |
| A mesh-free finite point method for advective-diffusive transport and fluid flow problems |
| Computational Mechanics, Vol. 21, pp. 283-292, 1998 |
| Löhner R. and Oñate E. |
| An advancing front point generation technique |
| Communications in Numerical Methods in Engineering, Vol. 14, pp. 1097-1108, 1998 |
| Estupiñán J., Oñate E. y Suárez B. |
| Optimización topológica mediante algoritmos genéticos, estrategias evolutivas y el método de Baluja |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14, Nº 4, pp. 427 - 438, 1998 |
| Rojek J. and Oñate E. |
| Sheet springback analysis using a simple shell triangle with translational degrees of freedom only |
| International Journal of Forming Processes, Vol. 1, nº 3, pp. 275 - 296, 1998 |
| Suárez B., Blanco E., Gil Ll., Zapata P. and Oñate E. |
| Ed-Elas2D: An educational program for computer-aided training in structural analysis using the finite element method |
| European Journal of Engineering Education, Vol. 23, nº 2, pp. 243-254, 1998 |
| Car E., Oller S. y Oñate E. |
| Un modelo constitutivo elasto plástico acoplado con daño mecánico e higrométrico. Aplicación a pavimentos flexibles |
| Revista Internacional de Ingeniería de Estructuras, Vol. 2, nº 2, pp. 20-38, 1998 |
| Codina R., Váquez M. and Zienkiewicz O.C. |
| A general algorithm for compressible and incompressible flow. Part III: The semi-implicit form. |
| International Journal for Numerical Methods in Fluids., Vol. 27, pp. 13-32, 1998 |
| Blasco J., Codina R. and Huerta A. |
| A fractional step method for the incompressible Navier-Stokes equations related to a predictormulticorrector algorithm |
| International Journal for Numerical Methods in Fluids, Vol. 28, pp. 1391-1419, 1998 |
| P. Nithiarasu, O.C. Zienkiewicz, B.V.K. Satya Sai, K. Morgan, R. Codina and M. Vázquez |
| Shock capturing viscosities for the general fluid mechanics algorithm |
| International Journal for Numerical Methods in Fluids, Vol. 28 , pp. 1325-1353, 1998 |
| Codina R. |
| A comparision of some finite element methods for solving the diffusion-convection-reaction equation. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 156, pp. 185-210, 1998 |
| Folch A., Martí J., Codina R. and Vázquez M. |
| A numerical model for temporal variations during explosive central-vent eruptions. |
| Journal of Geophysical Research, Vol. 103, pp. 20883-20899, 1998 |
| Cante J.C., Oliver J. y Oller S. |
| Simulación numérica de procesos de compactación de pulvimateriales. Parte I. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14, Nº. 1, pp. 67-99, 1998 |
| Cante J.C., Oliver J. y Oller S. |
| Simulación numérica de procesos de compactación de pulvimateriales. Parte II. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14, Nº. 1, pp. 101-116, 1998 |
| Bugeda G., Cervera M. and Lombera G. |
| Numerical prediction of temperature and density distributions in selective laser sintering processes. |
| Rapid Prototipe Journal, Vol. 14, pp. 403-420, 1998 |
| Faria R., Oliver J. y Cervera M. |
| A Strain-based plastic viscous-damage model for massive concrete structures. |
| Int. Journal of Solids and Structures, Vol. 35, pp. 1533-1558, 1998 |
| Agelet de Saracibar C. |
| Numerical analysis of coupled thermomechanical contact problems. |
| Archives of Computational Methods in Engineering., Vol. 5-3, pp. 243-301, 1998 |
| Hurtado J. and Barbat A.H. |
| Simulation methods instochastic mechanics.. |
| Archives of Computational Methods in Engineering., Vol. 5, pp. 3-30, 1998 |
| Bozzo J. and Barbat A.H. |
| Application of qualitative reasoning in engineering. |
| Applied Artificial Intelligence, Vol. 12, pp. 29-48, 1998 |
| Molins C., Roca P. and Barbat A.H. |
| Flexibility-based linear dynamic analysis of complex structures with curved-3D members. |
| Earthquake Enginnering and Structural Dynamics, Vol. 27, pp. 731-747, 1998 |
| Hurtado J.E. and Barbat A.H. |
| Fourier-based maximum emtropy method in stochastic dynamics. |
| Structural Safety, Vol. 20, pp. 221-235, 1998 |
| Barbat A.H., Oller S., Oñate E. and Hanganu A. |
| Viscous damage model for Timoshenko beam structures |
| Int. Journal of Solids and Structures, Vol. 34, No. 30, pp. 3953 - 3976, 1997 |
| Matias W. T. y Oñate E. |
| Análisis de la inestabilidad de estructuras por el método de desplazamiento crítico |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 13, 2, pp. 241-263, 1997 |
| Cruchaga M. and Oñate E. |
| A finite element formulation for incompressible flow problems using a generalized streamline operator |
| Computer Methods in Applied Mechanics and Engineering, Vol. 143, Issue 1-2, pp. 49-67, 1997 |
| Oñate E., García J. and Idelsohn S. |
| Computation of the stabilization parameter for the finite element solution of advective-diffusive problems |
| International Journal for Numerical Methods in Fluids, Vol. 25, pp. 1385-1407, 1997 |
| Codina R. and Soto O. |
| Finite element solution of the Stokes problem with dominating Coriolis force. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 142, pp 215-234, 1997 |
| Codina R. and Blasco J. |
| A finite element formulation for the Stokes problem allowing equal velocity - pressure interpolation. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 143, pp 373-391, 1997 |
| Oñate E., Celentano D., Codina R., Oller S, Soto O., Dabir A. y Duffett G. |
| Avan¸cos na Simula¸c~ao do Enchimento de Molda¸c~oes e do Processo de Solidifica¸c~ao a Arrefecimento em Fundiçao |
| Fundiçao, Num. 205, pp. 10-15, 1997 |
| Oñate E., Celentano D., Oller S., Sotto O., Dabir S. an Duffet G. |
| Avanços na simulaçao do enchimento de moldaçoes e do processo de solidificaço e arrefecimento em fundiçao. |
| Revista de Associaçao Portuguesa de Fundiçao, Nº. 205, pp. 10-15, 1997 |
| Oliver J. |
| Simulació numèrica de processos. |
| TERAFLOP. Noticiari del Centre de Supercomputació de Catalunya, Vol. 1, pp. 33-33, 1997 |
| Agelet de Saracibar C. |
| A new frictional time integration algorithm for large-slip multi-body frictional contact problems. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 142, pp. 303-334, 1997 |
| Aguiar R. y Barbat A.H. |
| Método de cálculo del índice global de daño para edificios de hormigón armado sometidos a acciones sísmicas. |
| Revista Internacional de Ingeniería de Estructuras, Vol. 2, pp. 1-33, 1997 |
| Barbat A.H. and Bozzo L. |
| Dynamic response of base isolated buildings. |
| Archives of Computational Methods in Engineering., Vol. 4, pp. 153-192, 1997 |
| Hurtado J.E. y Barbat A.H. |
| Vibración aleatoria no lineal de edificios aislados en la base con control activo. |
| Revista de Ingeniería Sísmica, Vol. 56, pp. 1-8, 1997 |
| Barbat A.H., Yépez F. and Canas J.A. |
| Response to A. J. Kappos Discussion of "Damage scenarios simulation for risk assessment in urban zones". |
| Earthquake Spectra, Vol. 13, pp. 553-556, 1997 |
| Aguiar R., Barbat A.H. and Hanganu A. |
| Análisis y clasificación de los índices de daño sísmico en estructuras de hormigón armado. |
| Revista Internacional de Ingeniería de Estructuras, Vol. 2, pp. 93-122, 1997 |
| Cervera M., Codina R., and Galindo M. |
| On the computational eciency and implementation of block-iterative algorithms for nonlinear coupled problems |
| Engineering Computations, Vol. 13, Num. 6, pp 4-30, 1996 |
| Heinrich J.C., Idelsohn S.R., Oñate E. and Vionnet C.A. |
| Boundary conditions for finite element simulations of convective flows with artificial boundaries |
| Int. Journal for Numerical Methods in Engineering, Vol. 39, pp. 1053-1071, 1996 |
| Celentano D., Oller S. and Oñate E. |
| A coupled thermomechanical model for the solidification of cast metals |
| Int. Journal of Solids and Structures, Vol. 33, No. 5, pp. 647-673, 1996 |
| Oller S., Oñate E., Miquel J. and Botello S. |
| A plastic damage constitutive model for composite materials |
| Int. Journal of Solids and Structures, Vol. 33, Nº. 17, pp. 2501-2518, 1996 |
| Idelsohn S.R., Heinrich J.C. and Oñate E. |
| Petrov-Galerkin methods for the transient advective-diffusive equation with sharp gradients |
| Int. Journal for Numerical Methods in Engineering, Vol. 39, pp. 1455-1473, 1996 |
| Oller S. and Oñate E. |
| A hygro-thermo-mechanical constitutive model for multiphase composite materials |
| Int. Journal of Solids and Structures, Vol. 33, No. 20-22, pp. 3179-3186, 1996 |
| Oñate E., Idelsohn S., Zienkiewicz O.C. and Taylor R.L. |
| A finite point method in computational mechanics. Applications to convective transport and fluid flow |
| Int. Journal for Numerical Methods in Engineering, Vol. 39, pp. 3839-3866, 1996 |
| Oñate E., Idelsohn S., Zienkiewicz O.,Taylor R.L. and Sacco C. |
| A stabilized finite point method for analysis of fluid mechanics problems |
| Computer Methods in Applied Mechanics and Engineering, Vol. 139, pp. 315-346, 1996 |
| Oñate E. and Matias W.T. |
| A critical displacement approach for predicting structural instability |
| Computer Methods in Applied Mechanics and Engineering, Vol. 134, pp. 135-161, 1996 |
| Oller S., Oñate E. and Miquel J. |
| Mixing anisotropic formulation for analysis of composites |
| Communications in Numerical Methods in Engineering, Vol. 12, pp. 471-482, 1996 |
| Barbat A.H., Molinares N. and Codina R. |
| Effectiveness of block iterative schemes in computing the seismic response of buildings with nonlinear base isolation |
| Computers and Structures, Vol. 58, Nº 1, pp 133-141, 1996 |
| Zienkiewicz O.C., Satya Sai B.V.K., Morgan K. and Codina R. |
| Split, characteristic based semi-implicit algorithm for laminar / turbulent incompressible flows |
| International Journal for Numerical Methods in Fluids, Vol. 23, Nº. 7, pp 787-809, 1996 |
| Luccioni B., Oller S. and Danesi R. |
| Coupled plastic-damage model. |
| Computer Methods in Applied Mechanics and Engineering, Nº. 1-2, pp. 81-90, 1996 |
| Oliver J., Oller S. and Cante J.C. |
| A plastic model for simulation of industrial powder compaction processes. |
| Int. Journal of Solids and Structures, Vol. 33, Nº. 20-22, pp. 3161-3178, 1996 |
| Oller S., Luccioni, and Barbat A. |
| Un método de evaluación de daño sísmico en estructuras de hormigón armado. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 12, Nº. 2, pp. 215-238, 1996 |
| Luccioni B. y Oller S. |
| Evaluación del daño sísmico en pórticos de hormigón armado. |
| Revista Internacional de Ingeniería en Estructurasl, Vol. 1, Nº. 1, pp. 1-16, 1996 |
| Cervera M. y Oliver J. |
| A rate.dependent isotropic damage model for the seismic analysis of concrete dams. |
| Earthquake Enginnering and Structural Dynamics, Vol. 25, pp. 987-1010, 1996 |
| García Garino C. y Oliver J. |
| Un modelo constitutivo para el análisis de sólidos elatoplásticos sometidos a grandes deformaciones. Parte II: Implementación numérica y ejemplos de aplicación. |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 12, pp. 147-169, 1996 |
| Oliver J. |
| Modelling strong discontinuities in solid mechanics via strain softening constitutive equations. Part I: Fundamentals |
| Int. Journal for Numerical Methods in Engineering, Vol. 39, pp. 3575-3600, 1996 |
| Oliver J. |
| Modelling strong discontinuities in solid mechanics via strain softening constitutive equations. Part II: Numerical simulation. |
| Int. Journal for Numerical Methods in Engineering, Vol. 39, pp. 3601-3623, 1996 |
| Hurtado J.E. and Barbat A.H. |
| Improved stochastic linearization method using mixed distributions. |
| Structural Safety, Vol. 18, pp. 49-62, 1996 |
| Aguiar R., Bozzo L., Barbat A.H. y Canas J.A. |
| Modelos constitutivos y su efecto sobre los indices de daño sísmico de pórticos de hormigón armado. |
| Hormigón y Acero, Vol 201, pp. 63-80, 1996 |
| Aguiar R., Bozzo L., Barbat A.H. y Canas J.A. |
| Efecto cortante y deterioro de adherencia en la evolución del daño sísmico en pórticos de hormigón armado. |
| Hormigón y Acero, Vol. 1, pp. 371-394, 1996 |
| Barbat A.H., Yépez F. and Canas J.A. |
| Damage scenarios simulation for seismic risk assessment in urban zones. |
| Earthquake Spectra, Vol. 12, pp. 371-394, 1996 |
| Hurtado J.E., Barbat A.H. y Canas J.A. |
| Simulación de acelerogramas compatibles con espectros de energía sísmica inducida. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 12, pp. 73-91, 1996 |
| Yépez F., Barbat A.H. y Canas J.A. |
| Simulación de escenarios del daño sísmico en zonas urbanas. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 12, pp. 331-358, 1996 |
| Oñate E. |
| On the derivation and possibilities of the secant stiffness matrix for non linear finite element analysis |
| Computational Mechanics, Vol. 15, pp. 572-593, 1995 |
| Cruchaga M., Oñate E. and Idelsohn S. R. |
| On the pseudomaterial approach for the analysis of transient forming processes |
| Communications in Numerical Methods in Engineering, Vol. 11, pp. 137-148, 1995 |
| Oller S., Botello S., Miquel J. and Oñate E. |
| An anisotropic elastoplastic model based on an isotropic formulation |
| Engineering Computations, Vol. 12, pp. 245-262, 1995 |
| Bugeda G., Cervera M., Lombera G. and Oñate E. |
| Numerical analysis of stereolithography processes using the finite element method |
| Rapid Prototyping Journal, Vol. 1, Nº. 2, pp. 13-23, 1995 |
| Lombera G., Bugeda G., Cervera M. and Oñate E. |
| Análisis de procesos de estereolitografía por el método de los elementos finitos |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, No. 2, pp. 205-224, 1995 |
| Cervera M., Barbat A.H., Hanganu H., Oñate E. and Cirauqui C. |
| Evaluación de la presión de fallo del edificio de contención de una central nuclear tipo PWR-W tres lazos. Parte I: Metodología |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, No. 2, pp. 271-293, 1995 |
| Botello S., Oñate E. and Miquel J. |
| Un modelo de elementos finitos con aproximación bidimensional por capas para el análisis de estructuras multilaminares |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, No. 2, pp. 225-246, 1995 |
| Flores F.G., Oñate E. and Zarate F. |
| New assumed strain triangles for non linear shell analysis |
| Computational Mechanics, Vol. 17, pp. 107 - 114, 1995 |
| Heege A., Alart P. and Oñate E. |
| Numerical modelling and simulation of frictional contact using a generalised Coulomb law |
| Engineering Computations, Vol. 12, No. 7, pp. 641-656, 1995 |
| Oñate E., Rojek J. and García Garino C. |
| NUMISTAMP: a research project for assessment of finite-element models for stamping processes |
| Journal of Materials Processing Technology, Vol. 50, pp. 17-38, 1995 |
| Barbat A.H., Cervera M., Cirauqui C., Hanganu H. y Oñate E. |
| Evaluación de la presión de fallo del edificio de contención de una central nuclear tipo PWR-W tres lazos. Parte II: Simulación numérica |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, No. 3, pp. 451-475, 1995 |
| Codina R. |
| A general algorithm for compressible and incompressible flow. Part I: The split, characteristic based scheme |
| International Journal for Numerical Methods in Fluids, Vol. 20, Num. 8/9, pp 869-885, 1995 |
| Zienkiewicz O.C, Morgan K,Satya Sai B.V.K. , Codina R. and Vázquez M. |
| A general algorithm for compressible and incompressible flow. Part II: Tests on the explicit form |
| International Journal for Numerical Methods in Fluids, Vol. 20, Nº 8/9, pp 887-913, 1995 |
| Pérez E., Celentano D. y Oller S. |
| Modelación de la solidificación y enfriamiento de la fundición (estado del arte). |
| Revista Fundidores, Vol. 32, pp. 29-34, 1995 |
| García Garino, C. y Oliver J. |
| Un modelo constitutivo para el análisis de sólidos elastoplásticos sometidos a grandes deformaciones. Parte I: Formulación teórica y aplicaciones a metales.. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, pp. 105-123, 1995 |
| Oliver J. |
| Continum modelling of strong discontinuities in solid mechanics using damage models. |
| Computational Mechanics, Vol. 17, pp. 49-61, 1995 |
| Molins C., Roca P. y Barbat A.H. |
| Una formulación matricial generalizada. Parte 2; Análisis Dinámico. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, pp. 23-36, 1995 |
| Aguiar R. y Barbat A.H. |
| Simulación de funciones de vulnerabilidad en edificios de hormigón armado. |
| CEINCI, Vol. 1, pp. 1-12, 1995 |
| Barbat A.H., Rodellar J., Ryan E.P. and Molinares N. |
| Active control of base isolated structures |
| Journal of Engineering Mechanics-Asce, Vol. 121, pp. 676-684, 1995 |
| Barbat A.H. y Bozzo L. |
| Edificios con sistemas de aislamiento de base pasivos y activos. |
| El Ingeniero Civil, Vol. 97, pp. 17-23, 1995 |
| Rodellar J., Ryan E.P. and Barbat A.H. |
| Adaptive control of uncertain coupled mechanical systems with applications to base-isolated structures. |
| Applied Mathematics and Computations, Vol. 70, pp. 299-314, 1995 |
| Bozzo L. and Barbat A.H. |
| Nonlinear response of structures with sliding base isolation. |
| Computers and Structures, Vol. 2, pp. 59-77, 1995 |
| Oñate E., Cervera M. and Zienkiewicz O.C. |
| A finite volume format for structural mechanics |
| Int. Journal for Numerical Methods in Engineering, Vol. 37, pp.181-201, 1994 |
| Bugeda G. and Oñate E. |
| A methodology for adaptive mesh refinement in optimum shape design |
| Computing Systems in Engineering, Vol. 5, No. 1, pp. 91-102, 1994 |
| Idelsohn S. R. and Oñate E. |
| Finite volumes and finite elements: two "good friends" |
| Int. Journal for Numerical Methods in Engineering, Vol. 37, pp. 3323-3341, 1994 |
| Celentano D., Oñate E. and Oller S. |
| A temperature-based formulation for finite element analysis of generalized phase-change problems |
| Int. Journal for Numerical Methods in Engineering, Vol. 37, pp. 3441-3465, 1994 |
| Codina R., Schäfer U. and Oñate E. |
| Mould filling simulation using finite elements |
| Int. Journal of Numerical Methods for Heat and Fluid Flow, Vol. 4, pp. 291-310, 1994 |
| Oñate E., Zárate F. and Flores F. |
| A simple triangular element for thick and thin plate and shell analysis |
| Int. Journal for Numerical Methods in Engineering, Vol. 37, pp. 2569-2582, 1994 |
| Oñate E., Cervera M. and Zienkiewicz O.C. |
| A finite volume format for structural mechanics |
| Int. Journal for Numerical Methods in Engineering, Vol. 37, pp. 181-201, 1994 |
| Barbat A., Hanganu A., Oñate E. and Oller S. |
| Evaluation of the damage degree in buildings structures subjected to earthquakes. |
| Reveu Romaine des Sciences Techniques Mécanique Appliquée, Vol. 39, Nº. 1, pp. 23-36 1994 |
| Barbat A.H., Rodellar J., Molinares N. and Ryan E.P. |
| Seismic performance of building with a class of adaptive nonlinear hybrid system. |
| Journal of Structural Control, Vol. 1, pp. 117-141, 1994 |
| Bugeda G. y Oñate E. |
| Investigación aerodinámica. El proyecto ECARP |
| Investigación y Ciencia, Nº. 211, pp. 81-82, 1994 |
| Blanco E. |
| Softeducativo: programas educativos para análisis de vigas y pórticos por métodos matriciales. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 10, No. 2, pp. 147-148, 1994 |
| Oñate, E. and Bugeda G. |
| A study of mesh optimality criteria in adaptive finite element analysis |
| Engineering Computations, Vol. 10, pp. 307-321, 1993 |
| Oñate, E. and Cervera M. |
| Derivation of thin plate bending elements with one degree of freedom per node: a simple three node triangle |
| Engineering Computations, Vol. 10, pp. 543-561, 1993 |
| Codina R. and Oñate E. |
| A penalty finite element method for non-Newtonian creeping flows |
| Int. Journal for Numerical Methods in Engineering, Vol. 8, pp.1395-1412, 1993 |
| Codina R. |
| An interactive penalty method for the finite element solution of the stationary Navier-Stokes equations. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 110, pp. 237-262, 1993 |
| Codina R. |
| Stability analysis of the forward Euler scheme for the convection - diffusion equation using the SUPG formulation in space. |
| Int. Journal for Numerical Methods in Engineering, Vol. 36, pp. 1445-1464, 1993 |
| Codina R. |
| A discontinuity-capturing crosswind-dissipation for the finite element solution of the convection-diffusion equation. |
| Computer Methods in Applied Mechanics and Engineering, Vol. 110, pp. 325-342, 1993 |
| Barbat A., Hanganu A., Oller S. and Oñate E. |
| Rigorous damping matrix for finite element models with viscous vehaviour. Applied to sismic problems. |
| Computing, Nº. 5, pp. 1-14, 1993 |
| Bugeda G. and Oliver J. |
| A general methodology for structural shape optimization problems using automatic adaptive remeshing. |
| Int. Journal for Numerical Methods in Engineering, Vol. 5, pp. 3161-3185, 1993 |
| Simó J.C. and Oliver J. |
| An analysis of strong discontinuities induced by strain-softening in rate-independent inelastic solids. |
| Computational Mechanics, Vol. 12, pp. 277-296, 1993 |
| Barbat A.H., Rodellar J., Ryan E.P. y Molinares N. |
| Comportamiento sísmico de edificios con un sistema no lineal de control híbrido. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 9, pp. 201-220, 1993 |
| Bugeda G. and Oñate E. |
| Optimum aerodynamic shape design using mesh adaptivity. |
| International Journal for Numerical Methods in Fluids, Vol. 20, Nº. 8/9 pp. 915-934, 1993 |
| Oñate E., Zienkiewicz O.C., Suárez B. and Taylor R.L. |
| A general methodology for deriving shear constrained Reissner-Mindlin plate elements |
| Int. Journal for Numerical Methods in Engineering, Vol. 33, pp. 345-367, 1992 |
| Sosnowski W., Oñate E. and Agelet de Saracibar C. |
| Comparative study on sheet metal forming processes by numerical modelling and experiment |
| Journal of Materials Processing Technology, Vol. 34, pp. 109-116, 1992 |
| Codina R., Oñate E. and Cervera M. |
| The intrinsic time for the streamline upwind Petrov-Galerkin formulation using quadratic elements |
| Computer Methods in Applied Mechanics and Engineering, Vol. 94, pp. 239-262, 1992 |
| Cervera M., Oliver J. and Galindo M. |
| Numerical analysis of dams with extensive cracking due to concrete hydration: Simulation of a real case. |
| Dam Engineering, Vol. 3, pp. 1-22, 1992 |
| Oñate E. and Agelet de Saracibar C. |
| Finite element analysis of sheet metal forming problems using a selective voided viscous shell membrane formulation |
| Int. Journal for Numerical Methods in Engineering, No. 30, pp. 1577-1593, 1991 |
| Egozcue J.J., Barbat A., Canas J.A., Miquel J. and Banda E. |
| A method to estimate intensity occurence probabilities in low seismic. |
| Earthquake Enginnering and Structural Dynamics, Vol. 20, pp. 43-60, 1991 |
| Miquel J., Botello S. and Oñate E. |
| A finite element formulation for analysis of composite laminate shells. |
| Mecánica Computacional, Vol. XI, 1991 |
| Oñate E., Botello S. and Miquel J. |
| Simulación numérica de choque de vehìculos por el método de los elementos finitos I. |
| STA, Nº. 111, pp. 25-33, 1991 |
| Oñate E., Botello S. and Miquel J. |
| Simulación numérica de choque de vehìculos por el método de los elementos finitos II. |
| STA, Nº. 112, pp. 30-33, 1991 |
| Egozcue J.J., Barbat A., Canas J.A., Miquel J. and Banda E. |
| A method to estimate intensity occurence probabilities in low seismic activity regions. |
| Earthquake Enginnering and Structural Dynamics, Vol. 20, pp. 43-60, 1991 |
| Oller S., Oñate E., Oliver J. and Lubliner J. |
| Finite element non-linear analysis of concrete structures using a plastic-damage model |
| Int. Journal of Engineering Fracture Mechanics, Vol. 35, pp. 219-231, 1990 |
| Cervera M., Oliver J., Herrero E. and Oñate E. |
| A computational model for progressive cracking in large dams due to the swelling of concrete |
| Int. Journal of Engineering Fracture Mechanics, Vol. 35, No. 1-3, pp. 575-85, 1990 |
| Oñate E., Agelet de Saracibar C. y Dalin J.B. |
| Análisis por elementos finitos de procesos de embutición de chapa mediante un modelo viscoplástico con degradación por huecos |
| Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 6, No. 1, pp. 7-23, 1990 |
| Lubliner J., Oller S., Oliver J. and Oñate E. |
| A plastic damage model for concrete |
| Int. Journal of Solids and Structures, Vol. 25, No. 3, pp. 299-326, 1989 |
| Miquel J., Suárez B. and Oñate E. |
| Dynamic analysis of structures using a Reissner-Mindlin finite strip formulation |
| Computers and Structures, Vol. 31, No. 6, pp. 957-975, 1989 |
| Oliver J. |
| A consistent characteristic length for smeared cracking models. |
| Int. Journal for Numerical Methods in Engineering, Vol. 28, pp. 461-474, 1989 |
| Oller S., Oliver J. Lubliner J. y Oñate E. |
| Un modelo constitutivo de daño plástico para materiales friccionales. Parte II: Generalización para procesos con degradación de rigidez. Ejemplos |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 4, No. 4, pp. 433-461, 1988 |
| Oñate E., Oller S., Oliver J. and Lubliner J. |
| A constitutive model for cracking of concrete based on the incremental theory of plasticity |
| Engineering Computations, Vol. 5, No. 3, pp. 309-320, 1988 |
| Oñate E., Kleiber M. and Agelet de Saracibar C. |
| Plastic and viscoplastic flow of void containing metals. Applications to axisymmetric sheet metal forming problems |
| Int. Journal for Numerical Methods in Engineering, Vol. 25, pp. 227-251, 1988 |
| Dvorkin E., Oñate E. and Oliver J. |
| On a non linear formulation for curved Timoshenko beam elements considering large displacement/rotation increments |
| Int. Journal for Numerical Methods in Engineering, Vol. 26, pp. 1597-1613, 1988 |
| Suárez B., Miquel J. y Oñate E. |
| Análisis dinámico de estructuras utilizando una formulación de bandas finitas de Reissner-Mindlin |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 4, No. 3, pp. 257-274, 1988 |
| Canas J.A., Rodellar J., Egozcue J.J., Barbat A.H. y Pujades L. |
| Análisis multimodal de ondas Rayleigh en el Oceano Pacífico. Aplicación a la zona lindante con las costas asiáticas. |
| Anales de física. Serie B. Aplicaciones, métodos e instrumentos, Vol. 84, pp. 325-332, 1988 |
| Canas J.A., Rodellar J., Egozcue J.J., Barbat A.H. y Pujades L. |
| Incompatibilidad de ondas Rayleigh y Love en el Oceano Pacífico. |
| Anales de física. Serie B. Aplicaciones, métodos e instrumentos, Vol. 84, pp. 333-341, 1988 |
| Barbat A.H., Mena U. y Yépez F. |
| Evaluación probabilista del riesgo sísmico en zonas urbanas. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14, No. 4, pp. 247-268, 1988 |
| Agelet de Saracibar C. y Oñate E. |
| Un modelo plástico no asociado para el análisis de localización en procesos de embutición de metales |
| Anales de Ingeniería Mecánica, Vol. 5.1, pp. 7-12, 1987 |
| Miquel J. and Bonet J. |
| Estudio de estructuras sometidas a esfuerzos de impacto en régimen elastoplástico y con grandes deformaciones por el método de los elementos finitos. Parte I. Formulación teórica. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 3. Nº. 2, pp. 173-203, 1987 |
| Miquel J. and Bonet J. |
| Estudio de estructuras sometidas a esfuerzos de impacto en régimen elastoplástico y con grandes deformaciones por el método de los elementos finitos. Parte II. Algoritmo de contacto - impacto y ejemplos. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 3. Nº. 3, pp. 275-296, 1987 |
| Oliver J y Fernández Roure J.R. |
| Consideraciones sobre los modelos numéricos de distribución para el análisis de la fisuración del hormigón. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 3, pp. 343-368, 1987 |
| López Almansa F., Barbat A. H. and Rodellar J. |
| SSP algorithm for linear and non-linear dynamic response simulation. |
| Int. Journal for Numerical Methods in Engineering, Vol. 26, pp. 2687-2706 , 1987 |
| Rodellar J., Barbat A.H. and Martín Sánchez J.M. |
| Predictive control and structures. |
| Journal of Engineering Mechanics-Asce, Vol. 113, pp. 797-812, 1987 |
| Rodellar R. y Barbat A.H. |
| El control automatic en el disseny d'estructures sotmeses a accions dinàmiques. |
| ESPAIS, Vol. 3, pp. 43-47, 1987 |
| Barbat A.H., Rodellar J., López Almansa F. y Carrera J. |
| Cálculo de la respuesta dinámica de estructuras mediante un procedimiento de estado. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 3, pp. 243-261, 1987 |
| Aguado A. and Blanco E. |
| Some comments to the F.I.P Recommendations about static test of pasive anchorage by bond in presstressed concrete. |
| Bulletin d'Information. Comité Eurointernational du Beton (C.E.B), Nº 181, 1987 |
| Oliver J. and Oñate E. |
| A total lagrangian formulation for the geometrically non linear analysis of structures using finite elements. Part II: arches, frames and axisymmetric shells |
| Int. Journal for Numerical Methods in Engineering, Vol. 23, pp. 253-274, 1986 |
| J. Miquel Canet and Marí A. |
| Análisis mediante elementos finitos de tableros nervados de hormigón armado. Estudio del ancho eficaz en secciones en T. |
| Hormigón y Acero, Nº. 159 pp. 41-57, 1986 |
| Oliver J. and Oñate E. |
| A finite element formulation for the analysis of marine pipelines during laying operations |
| Int. Journal of Pipelines, Vol. 5, pp. 15-35, 1985 |
| Oliver J., Oñate E., Peraire J. y Chueca R. |
| Análisis no lineal de tanques criogénicos bajo cargas térmicas |
| Hormigón y Acero, No. 155, pp.99-123, 1985 |
| J. Rivera, J. Miquel Canet, A. Marí |
| Análisis no lineal de placas y láminas de hormigón armado con vigas de borde pretensadas, por el método de los elementos finitos. |
| Hormigón y Acero, Nº. 156 pp. 45-63, 1985 |
| Rodellar J. and Barbat A.H. |
| Active control of building structures under measured seismic loads. |
| Engineering Computations, Vol. 2, pp. 128-134, 1985 |
| Rodellar J. and Barbat A.H. |
| Control digital de la respuesta sísmica de estructuras. |
| Rev. Int. de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 1, Nº1, pp. 53-66, 1985 |
| Aguado A. y Blanco E. |
| Comentarios de las recomendaciones de la F.I.P sobre ensayos estáticos de anclajes pasivos de hormigón pretensado. |
| Hormigón y Acero, No. 156, pp.145-156, 1985 |
| Oliver J. and Oñate E. |
| A total lagrangian formulation for the geometricaly non linear analysis of structures using finite elements. Part I: Two dimensional problems: shell and plate structures |
| Int. Journal for Numerical Methods in Engineering, Vol. 20, pp. 2253-2281, 1984 |
| Oliver J. y Oñate E. |
| Una formulación para el estudio por el método de los elementos finitos de la deformación de tuberías marinas durante su instalación |
| Revista de Obras Públicas, Vol 130, (3218): pp. 747-763, 1983 |
| Oñate E. y Suárez B. |
| Estudio de la distribución transitoria del gas en redes urbanas por el método de los elementos finitos |
| Anales de Ingeniería Mecánica, Año 2, No. 1, pp.59-68, 1984 |
| Egozcue J. y Miquel J. |
| Revisión de métodos de análisis espectral. Aplicación al estudio y simulación de un registro sísmico. |
| Revista de Obras Públicas, Vol.131, (3226): pp429-446, 1984 |
| Oñate E. and Zienkiewicz O.C. |
| A viscous shell formulation for the analysis of thin sheet metal forming |
| Int. Journal of Mechanical Science, Vol. 25, No. 5, pp. 305-335, 1983 |
| Oñate E. and Suárez B. |
| A comparison of the linear quadratic and cubic mindlin strip elements for the analysis of thick and thin plates |
| Computers and Structures, Vol. 17, No. 3, 1983 |
| Oñate E. and Suárez B. |
| A unified approach for the analysis of bridges, plates and axisymmetric shell structures using the linear Mindlin strip |
| Computers and Structures, Vol. 17, No. 3, pp. 427-439, 1983 |
| Oñate E., Gaona, Oliver J. y Suárez B. |
| Posibilidades de los ordenadores personales en el cálculo de estructuras por el método de los elementos finitos |
| Revista de Obras Públicas, Vol. 130, (3212): pp. 231-248, 1983 |
| Oñate E. and Suárez B. |
| A comparison of the linear quadratic and cubic mindlin strip elements for the analysis of thick and thin plates |
| Computers and Structures, Vol. 17, No. 3, 1983 |
| López Pita A. y Miquel J. |
| El prisma finito: Cálculo de la vía sobre losa de hormigón. |
| A.I.T., pp. 18-31, 1983 |
| López Pita A. y Miquel J. |
| Optimización desde el punto de vista resistente de las vías sobre placa de hormigón. |
| A.I.T., pp. 6-11, 1983 |
| Oliver J., Suárez B., Blanco E. y Oñate E. |
| El laboratorio de ensayo de estructuras en modelo reducido de la Escuela de Ingenieros de Caminos de Barcelona |
| Hormigón y Acero, No. 145, pp. 65-78 1982 |
| López Pita A. y Miquel J. |
| La vía sobre placa de hormigón: Métodos estructurales de cálculo. |
| A.I.T., pp. 6-23, 1982 |
| Zienkiewicz O.C., Oñate E. and Heinrich J.C. |
| A general formulation for the coupled thermal flow of metals using finite elements |
| Int. Journal for Numerical Methods in Engineering, Vol. 17, pp. 1497-1514, 1981 |
| Oñate E. |
| A comparison of Kirchhoff and Mindlin strips in the analysis of plate and bridge structures |
| Annals of the Polish Academy of Sciences, Tom XXIII, ZESZYT, Vol. 3, pp. 1196-220, 1981 |
| Oñate E. |
| La formulación del flujo viscoplástico y sus diversas aplicaciones prácticas por el método de elementos finitos |
| Revista de Obras Públicas, Vol127, (3178): 115-129, 1980 |
| Zienkiewicz O.C., Jain P. C. and Oñate E. |
| Flow of solids during forming and extrusion: Some aspects of numerical solutions |
| Int. Journal of Solids and Structures, Vol. 14, pp. 15-38, 1978 |
| Negoita A. and Barbat A.H. |
| Expresión de las ecuaciones del movimiento para depósitos de agua elevados considerando las fuerzas hidrodinámicas de interacción. |
| Revue de Méchanique Appliquée, Vol. 37, pp. 59-65, 1978 Bucarest (Rumanía) |
| Breaban V. and Barbat A.H. |
| Combined finite element-finite difference technique in solving arch dam - reservoir seismic interaction problems. |
| Bulletin of the Polytechnic Institute of Iasi, Rumania, Vol. XXIV, pp. 45-48, 1978 |
| Breaban V., Barbat A.H. and Ionescu C.D. |
| The influence of higher natural modes on the seismic response of rockfill dams. |
| Bulletin of the Polytechnic Institute of Iasi, Rumania, Vol. XXIV, pp. 27-32, 1978 |
| Zienkiewicz O.C., Bauer J., Morgan K. and Oñate E. |
| A simple and efficient element for axisymmetric shells |
| Int. Journal for Numerical Methods in Engineering, Vol. 11, No. 10, pp. 1545-1558, 1977 |
| Middleton J. y Oñate E. |
| Diseño óptimo de vasijas de presión, utilizando el método de elementos finitos y un optimizador no lineal |
| Revista E.T.S.I.I.T., No. 11, 1977 |
| Oñate E. |
| Análisis de puentes mediante el método de las bandas finitas |
| Hormigón y Acero, No. 124, 1977 |
| Barbat A.H. and Breaban V. |
| Finite element-finite difference method for a flat upstream dam-reservoir system seismic analysis. |
| Bulletin of the Polytechnic Institute of Lasi, Rumania, Vol. XXIII, pp. 29-32, 1997 |
| Barbat A.H., Ionescu C.D. and Breaban V. |
| Dynamic analysis of elevated water tanks considering the water-structure interaction. |
| Cienkoscienne Elementy i Konstrukcje Budowlane, Polonia, Vol. II, pp. 37-46, 1977 |
| Barbat A.H., Breaban V. and Ionescu C.D. |
| Vertical ground motion component considered in the seismic response of rockfill dams |
| Bulletin of the Polytechnic Institute of Iasi, Rumania, Vol. XXII, pp. 15-18, 1976 |
| Breaban V. and Barbat A.H. |
| Combined finite element-finite difference technique in solving arch dam - reservoir seismic interaction |
| Bulletin of the Polytechnic Institute of Iasi, Rumania, Vol. XXII, pp. 15-18, 1976 |
Items: 0 Total: 0 €
