Friday, November 24, 2017
  [ login ]
2014

Abdollahi A., Peco C., Millan D., Arroyo M. and Arias I. Computational evaluation of the flexoelectric effect in dielectric solids, Journal of Applied Physics, Vol. 116, 093502, 2014, 10.1063/1.4893974

Agelet S., Chiumenti M., Cervera M., Dialami N. and Seret. A. Computational modeling and sub-grid scale stabilization of incompressibility and convection in the numerical simulation of friction stir welding processes, Archives of Computational Methods in Engineering, Vol. 21, pp 3-37, 2014, 10.1007/s11831-014-9094-z

Alonso E.E. and Pinyol N.M. Slope stability in slightly fissured claystones and marls, Landslides, 2014, 10.1007/s10346-014-0526-5

Alonso, E. E., Pinyol, N. M. and Yerro. Mathematical modelling of slopes, Procedia Earth and Planetary Science, Vol. 9, pp. 64-73, 2014, 10.1016/j.proeps.2014.06.002

Amiri F., Anitescu C., Arroyo M., Bordas S.P.A. and Rabczuk T. XLME interpolants, a seamless bridge between XFEM and enriched meshless methods, Computational Mechanics, Vol. 53, pp. 45-57, 2014, 10.1007/s00466-013-0891-2

Amiri F., Millan D., Shen Y., Rabczuk T. and Arroyo M. Phase-field modeling of fracture in linear thin shells, Theoretical and Applied Fracture Mechanics, Vol. 69 pp.102-109, 2014, 10.1016/j.tafmec.2013.12.002

Ammar A., Huerta A., Chinesta F., Cueto E. and Leygue A. Parametric solutions involving geometry: a step towards efficient shape optimization, Theoretical and Applied Fracture Mechanics, Vol. 268, pp. 178-193, 2014, 10.1016/j.cma.2013.09.003

Arroyo M. and Simone A. Shape control of active surfaces inspired by the movement of euglenids, Journal of the Mechanics and Physics of Solids, Vol. 62, pp. 99-112, 2014, 10.1016/j.jmps.2013.09.017

Ávila M., Codina R. and Principe. J. Large eddy simulation of low Mach number flows using a dynamical and orthogonal subgrid scales, Computers & Fluids, Vol. 99, pp. 44-66, 2014, 10.1016/j.compfluid.2014.04.003

Badia S., Codina R., Gudi T. and Guzmán J. Error analysis of discontinuous Galerkin methods for the Stokes problem under minimum regularity, IMA Journal of Numerical Analysis, Vol. 34, pp. 800-819, 2014, 10.1093/imanum/drt022

Badia S, Codina R. and Espinoza H. Stability, convergence and accuracy of stabilized finite element methods for the wave equation in mixed form, SIAM Journal on Numerical Analysis, Vol. 52, pp. 1729-1752, 2014, 10.1137/130918708

Badia S. and Hierro A. On monotonicity-preserving stabilized finite element approximations of transport problems, SIAM J. Sci. Comput, Vol. 36(6), pp. 2673-2697, 2014, 10.1137/130927206

Badia S. and Gutiérrez-Santacreu J.V. Convergence towards weak solutions of the Navier-Stokes equations for a finite element approximation with numerical subgrid scale modeling, IMA Journal of Numerical Analysis, Vol. 34(3), pp. 1193-1221, 2014, 10.1093/imanum/drt023

Badia S., Martín A. and Planas R. Block recursive LU preconditioners for the thermally coupled incompressible inductionless MHD problem, Journal of Computational Physics, Vol. 274, pp. 562-591, 2014, 10.1016/j.jcp.2014.06.028

Badia S., Martín A. and Principe J. A highly scalable parallel implementation of balancing domain decomposition by constraints, SIAM Journal on Scientific Computing, Vol. 36(2), pp. 190-218, 2014, 10.1137/130931989

Baiges J. and Codina R. Weak imposition of essential boundary conditions in the finite element approx. of elliptic problems with non-matching meshes, International Journal for Numerical Methods in Engineering, 2014, 10.1002/nme.4815

Barros J., Flores R., López J. and Martínez-Val. R. Frequency and damping identification in flutter flight testing, Journal of Aerospace Engineering, 2014, 10.1177/0954410014533100

Buachart C., Kanok-Nukulchai W., Ortega E. and Oñate E. A shallow water model by finite point method, International Journal of Computational Methods, Vol. 11(01), 1350047, 2014, 10.1142/S0219876213500473

Buddhima I., Premadasa W., Brown E.T., Gens A. and Heitor, A. Shear strength of rock joints influenced by compacted infill, Int. J. Rock Mechanics & Mining Science, Vol. 70, pp. 296-307, 2014, 10.1016/j.ijrmms.2014.04.019

Bussetta P., Arroyo M., Gens A. and O’Sullivan C. Multi-scale analysis of cone penetration test (CPT) in a virtual calibration chamber, Canadian Geotechnical Journal, Vol. 51 (1), pp. 51-66, 2014, 10.1139/cgj-2012-0476

Bussetta P., Dialami N., Boman R., Chiumenti M., Agelet C., Cervera M. and Ponthot. J-P. Comparison of a fluid and a solid approach for the numerical simulation of Friction Stir Welding with a non-cylindrical pin, Steel Research International, Vol. 85, pp. 968–979, 2014, 10.1002/srin.201300182

Cai Q., Kollmannsberger S., Sala-Lardies E., Huerta A. and Rank E. On the natural stabilization of convection dominated problems using high order Bubnov–Galerkin finite elements, Computers and Mathematics with Applications, Vol. 66, pp. 2545-2558, 2014, 10.1016/j.camwa.2013.09.009

Cante J., Dávalos C., Hernández J.A., Oliver J., Jonsén P., Gustafsson G., and Häggblad H.-A. PFEM-based modeling of industrial granular flows, Comp. Part. Mech, Vol. 1, pp. 47-70, 2014, 10.1007/s40571-014-0004-9

Carreño M.L., Barbat H. and Cardona O.D. Método numérico para la evaluación holística del riesgo sísmico utilizando la teoría de conjuntos difusos, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 30-1, pp. 25-34, 2014, 10.1016/j.rimni.2012.10.002

Castillo E. and Codina. R. Stabilized stress-velocity-pressure finite element formulations of the Navier-Stokes problem for fluids with nonlinear viscosity, Computer Methods in Applied Mechanics and Engineering, Vol. 279, pp. 554-578, 2014, 10.1016/j.cma.2014.07.003

Castillo E. and Codina. R. Variational multi-scale stabilized formulations for the stationary three-field incompressible viscoelastic flow problem, Computer Methods in Applied Mechanics and Engineering, Vol. 279, pp. 579-605, 2014, 10.1016/j.cma.2014.07.006

Castro Medina J.C., López Almansa F., and Oller S. Modelización numérica del comportamiento estructural cíclico de barras esbeltas de acero con pandeo restringido, Revista Internacional de Métodos Numéricos para el Cálculo y Diseño en Ingeniería, Vol. 30 (4), pp. 229-237, 2014, 10.1016/j.rimni.2013.07.008

Cerrolaza M., Carrero W, Cedeño J. and Valencia L. Finite element analysis of a device for alveolar osteogenic distraction in human mandible, J. Biomed Eng. App. Bas. & Comm., 2014, 10.4015/S1016237215500349

Cerrolaza M., Gavidia G., Soudah E. and Martín M. Modeling human tissues: an integrated methodology, J. Biomed Eng. App. Bas. & Comm., Vol. 26(1), 1450012, 2014, 10.4015/S1016237214500124

Climent N., Arroyo M., O’Sullivan C. and Gens A. Sand production simulation coupling DEM with CFD, European Journal of Environmental and Civil Engineering, Vol. 18 (9), pp. 983-1008, 2014, 10.1080/19648189.2014.920280

Cosimo A, Cardona A. and Idelsohn S.R. Improving the k-compressibility of hyper reduced order models with moving sources: Applications to welding and phase change problems, Computer Methods in Applied Mechanics and Engineering, Vol 274, pp. 237–263, 2014, doi:10.1016/j.cma.2014.02.011

Costarelli S., Arroyo M., Paz R.R., Dalcin L.D. and Idelsohn S.R. GPGPU implementation of the BFECC algorithm for pure advection equations, Cluster Computing, Vol 17, 243-254, 2014, 10.1007/s10586-013-0329-9

Del Río J., Romero E. and Cerrolaza M. Analysis of blood flow passing through heart valves using a computational model of concentrated parameters, Biom. Eng. App. Bas. & Comm, Vol. 26(6), 8pp, 2014, 10.4015/S1016237214500689

Dialami N., Chiumenti M., Cervera M., Agelet de Saracibar C. and Ponthot J.P. Material flow visualization in friction stir welding via particle tracing, International Journal of Material Forming, Vol. 8 (2), pp. 167-181, 2014, 10.1007/s12289-013-1157-4

Espinoza H., Codina R. and Badia S. A Sommerfeld non-reflecting boundary condition for the wave equation in mixed form, Computer Methods in Applied Mechanics and Engineering, Vol. 276, pp. 122-148, 2014, doi:10.1016/j.cma.2014.03.015

Flores R., Ortega E. and Oñate, E. Simple and efficient numerical tools for the analysis of parachutes, Engineering Computations, Vol. 31 (5), pp. 957-985, 2014, 10.1108/EC-10-2012-0247

Garitte B., Gens A., Vaunat J. and Armand G. Thermal conductivity of argillaceous rocks: Determination methodology using in situ heating tests, Rock Mechanics and Rock Engineering, Vol. 47 (1), pp. 111-129, 2014, 10.1007/s00603-012-0335-x

Gimenez J., Nigro N.M. and Idelsohn S.R. Evaluating the performance of the Particle Finite Element Method in parallel architcetures, Computational Particles Mechanics, Vol. 1(1), pp 103-116, 2014, 10.1007/s40571-014-0009-4

Giorgiani G., Fernández-Méndez S. and Huerta A. Hybridizable Discontinuos Galerkin with degree adaptivity for the incompressible Navier-Stokes equations, Computers & Fluids, Vol. 98, pp. 196-208, 2014, 10.1016/j.compfluid.2014.01.011

Gonzalez-Drigo R., Ávila-Haro J. A., Barbat A.H., Pujades L. G., Vargas Y. F., Lagomarsino S. and Cattari S. Modernist URM buildings of Barcelona: Seismic vulnerability and risk assessment, International Journal for Architectural Heritage, 2014, 10.1080/15583058.2013.766779

Heltai L., Arroyo M. and DeSimone A. Nonsingular isogeometric boundary element method for Stokes flows in 3D, Computer Methods in Applied Mechanics and Engineering, Vol. 268, pp. 514-539, 2014, 10.1016/j.cma.2013.09.017

Hernandez J.A., Oliver J., Huespe A.E., Caicedo M.A. and Cante J.C. High-performance model reduction techniques in computational multiscale homogenization, Computer Methods in Applied Mechanics and Engineering, Vol. 276 149-189, 2014, 10.1016/j.cma.2014.03.011

Hoffmann C., Meler N., Pinyol N.M. and Alonso E. E. Small scale slope failure benchmark test. Modelling and prediction, Procedia Earth and Planetary Science, Vol. 9, pp. 201-205, 2014, 10.1016/j.proeps.2014.06.021

Idelsohn S.R., Marti J., Becker P. and Oñate E. Analysis of multifluid flows with large time steps using the Particle Finite Element Method, Int. Journal for Num. Methods in Fluids, Vol. 75 (9), pp. 621-644, 2014, 10.1002/fld.3908

Kempel F., Schartel B., Marti J. M., Butler K. M., Rossi R., Idelsohn S.R., Oñate E. and Hofman A. Modelling the vertical UL 94 test: competition and collaboration between melt dripping, gasification and combustion, Fire and Materials, 2014, 10.1002/fam.2257

Khalifat, N., Rahimi M., Bitbol A.F., Seigneuret M., Fournier J.B., Puff N., Arroyo M. and Angelova M.I. Interplay of packing and flip-flop in local bilayer deformation. How phosphatidylglycerol could rescue mitochondrial function in a cardiolipin-deficient yeast mutant, Biophysical Journal, Vol. 107 (4), pp. 879-890, 2014, 10.1016/j.bpj.2014.07.015

Kollmannsberger S., Özcan A., Baiges J., Ruess M., Rank E. and Reali A. Parameter-free, weak imposition of Dirichlet boundary conditions and coupling of trimmed and non-conforming patches, International Journal for Numerical Methods in Engineering, 2014, 10.1002/nme.4817

Larese A., Rossi R. and Oñate. Finite element modeling of free surface flow in variable porosity media, Archives for Numerical Methods in Engineering, 2014, 10.1007/s11831-014-9140-x

Li B., Peco C., Millan D., Arias I. and Arroyo M. Phase-field modeling and simulation of fracture in brittle materials with strongly anisotropic surface energy, International Journal for Numerical Methods in Engineering, 2014, 0.1002/nme.4726

Lloret-Cabot M., Wheeler S.J., Pineda J.A., Sheng D. and Gens A. Relative performance of two unsaturated soil models using different constitutive variables, Canadian Geotechnical Journal, Vol. 51(12), pp. 1423-1437, 2014, 10.1139/cgj-2013-0462

López-Almansa F. and Oller S. Resolución numérica de las ecuaciones del movimiento de edificios de varias plantas con no linealidades severas, Revista Internacional de Métodos Numéricos para el Cálculo y Diseño en Ingeniería, Vol. 30 (3), pp. 194-202, 2014, 10.1016/j.rimni.2013.06.007

Marti-Herrero J., Alvarez R., Rojas M.R., Aliaga L., Céspedes R. and Carbonell J. Improvement through low cost biofilm carrier in anaerobic tubular digestion in cold climate regions, Bioresource Technology, Vol. 167, pp. 87-93, 2014, 10.1016/j.biortech.2014.05.115

Marti-Herrero J., Chipana M., Cuevas C., Paco G., Serrano V., Zymla B., Heising K., Sologuren J. and Gamarra A. Low cost tubular digesters as appropriate technology for widespread application: Results and lessons learned from Bolivia, Renewable Energy, Vol. 71, pp. 156-165, 2014, 10.1016/j.renene.2014.05.036

Marulanda M.C., Cardona O.D., Mora M.G. and Barbat A.H. Design and implementation of a voluntary collective earthquake insurance policy to cover low-income homeowners in a developing country, Natural Hazards, Vol. 74, pp. 2071-2088, 2014, 10.1007/s11069-0114-1291-4

Oñate E, Celigueta M.A., Latorre S., Casas G., Rossi R. and Rojek J. Lagrangian analysis of multiscale particulate flows with the particle finite element method, Computational Particle Mechanics, Vol. 1 (1), pp. 85-102, 2014, 10.1007/s40571-014-0012-9

Oñate E., Nadukandi P. and Idelsohn S.R. P1/P0+ elements for incompressible flows with discontinuos material properties, Comput. Methods Appl. Mech. Engrg, Vol. 271, 185-209, 2014, 10.1016/j.cma.2013.12.009

Ortega E., Oñate E., Idelsohn S.R. and Flores R. Application of the finite point method to high-Reynolds number compressible flow problems, International Journal for Numerical Methods in Fluids, Vol. 74(10), pp. 732-748, 2014, 10.1002/fld.3871

Ortega E., Oñate E., Idelsohn S.R. and Flores R. Comparative accuracy and performance assessment of the finite point method in compressible flow problems, Computers & Fluids, Vol. 89, pp. 53-65, 2014, 10.1016/j.compfluid.2013.10.024

Otero F., Oller S., Martinez X. and Salomón O. Numerical homogenization for composite materials analysis. Comparison with other micro mechanical formulations, Composite Structures, Vol. 122, pp. 405-416, 2014, 10.1016/j.compstruct.2014.11.041

Pelà L., Cervera M., Oller S. and Chiumenti M. A localized damage model for orthotropic materials, Engineering Fracture Mechanics, Vol. 124-125, pp. 196-216, 2014, 10.1016/j.engfracmech.2014.04.027

Pérez M. A., Gil L., Sánchez M. and Oller S. Comparative experimental analysis of the effect caused by artificial and real induced damage in composite laminates, Composite Structures, Vol. 112, pp. 169-178, 2014, 10.1016/j.compstruct.2014.02.017

Pérez-Pozo L., Campos A., Lascano S., Oller S. and Rodríguez-Ferran A. A Finite points method approach for strain localization using the gradient plasticity formulation, Mathematical Problems in Engineering, Vol. 2014, pp.12, 2014, 10.1155/2014/782079

Ryzhakov P., Cotela P. J., Rossi R. and Oñate E. A two-step monolithic method for efficient simulation of incompressible flows, Int. Journal for Num. Methods in Fluids, Vol. 74(12), pp. 919-934, 2014, 10.1002/fld.3881

Soudah E., Rossi R, Idelsohn S.R. and Oñate. E. A reduced-order model based on the coupled 1D-3D finite element simulations for an efficient analysis of hemodynamics problems, Computational Mechanics, Vol. 54 (4), pp. 1013-1022, 2014, 10.1007/s00466-014-1040-2

Terradas G., Pham C.H., Triolo M.J., Martí-Herrero J. and Sommer S.G. Thermic model to predict biogas production in unheated fixed-dome digesters buried in the ground, Environmental Science Technology, Vol. 48(6), pp. 3253-3262, 2014, 10.1021/es403215w

Vanegas J.M. and Arroyo M. Force transduction and lipid binding in MscL: A continuum-molecular approach, PloS One, Vol. 9, pp. e113947, 2014, 10.1371/journal.pone.0113947

Vanegas J.M., Torres-Sánchez A. and Arroyo M. Importance of force decomposition for local stress calculations in biomembrane molecular simulations, Journal of Chemical Theory and Computation, Vol. 10(2), pp. 691-702, 2014, 10.1021/ct4008926

Vargas P.E., Oñate E. and Oller S. Formulación de elementos finitos para vigas de sección abierta formadas por laminados compuestos incluyendo las deformaciones tangenciales por cortante y torsión, Revista Internacional de Métodos Numéricos para el Cálculo y Diseño en Ingeniería, Vol. 30 (4), pp. 238-246, 2014, 10.1016/j.rimni.2013.07.007

Velásquez C.A., Cardona O.D., Carreño M.L. and Barbat A.H. Retrospective assessment of risk to natural hazards, International Journal for Disaster Risk Reduction, Vol. 10(2), Part B, pp. 477-489, 2014, 10.1016/j.ijdrr.2014.05.005

Velásquez C.A., Cardona O.D., Mora M.G., Yamín L.E., Carreño M.L. and Barbat H. Hybrid loss exceedance curve (HLEC) for disaster risk assessment, Natural Hazards, Vol. 72 (2), pp. 455-479, 2014, 10.1007/s11069-013-1017-z

Yamin L.E., Hurtado A.I., Barbat A.H. and Cardona O.D. Seismic and wind vulnerability assessment for the GAR-13 global risk model, International Journal for Disaster Risk Reduction, Vol. 10, Part B, pp. 452-460, 2014, 10.1016/j.ijdrr.2014.05.007

Zhang K. and Arroyo M. Understanding and strain-engineering wrinkle networks in supported graphene through simulations, Journal of the Mechanics and Physics of Solids, Vol. 72, pp. 61-74, 2014, 10.1016/j.jmps.2014.07.012

Alberto F. Martín, Ruymán Reyes, Rosa M. Badia, Enrique S. Quintana-Ortí Leveraging Task-Parallelism in Message-Passing Dense Matrix Factorizations using SMPSs, Parallel Computing, Vol. 5-6 , pp 113-128, 2014.

José I. Aliaga, María Barreda, Manuel F. Dolz, Alberto F. Martín, Rafael Mayo, Enrique S. Quintana-Ortí, Assessing the impact of the CPU power-saving modes on the task-parallel solution of sparse linear systems, Cluster Computing, Vol. 17(4), pp 1335-1348, 2014.

2013

Agelet de Saracibar C., López R., Ducoeur B., Chiumenti M. and de Meester B. A numerical model for the simulation of precipitates dissolution of hardened aluminium alloys using neural networks, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Volume 29, Issue 1, January-March 2013, Pages 29-37, First published on-line: 22 February 2013 | doi: 10.1016/j.rimni, 2013

Alfonzo M. and Cerrolaza M. Simulación y análisis computacional del conducto medular del fémur en presencia de una prótesis de cadera, Rev. Facultad Ingeniería UCV 28(4):25-36, 2013

Alonso E., Pinyol N.M. and Pineda J.A. Foundation of a gravity dam on layered soft rock: shear strength of bedding planes in laboratory and large “in situ” tests. Geotechnical and geological engineering. pp. 1 - 12. 07/2013

Alonso E.E., Pinyol N.M. and Gens A. Compacted soil behaviour: initial state, structure and constitutive modeling. Geotechnique, 63 (6), 463-478, 10.1680/geot.11.P.134, 2013

Avila-Haro J. A., González-Drigo J. R., Vargas Y. F., Pujades L. G. and Barbat A. H. Deterministic and Probabilistic Earthquake Scenarios for the Seismic Risk Analysis of URM Buildings, Key Engineering Materials, 525-526, 2013, 537-540.

Badia S., Codina R. and Planas R. On unconditionally convergent stabilized finite element approximation of resistive magnetohydrodynamics, Journal of Computational Physics, Vol. 234 (2013), 399-416

Badia S., Martín A. F. and Príncipe J. Enhanced Balancing Neumann-Neumann preconditioning in computational fluid and solid mechanics, International Journal for Numerical Methods in Engineering, Vol. 96(4), pp. 203–230, 2013.

Badia S., Martín A. F. and Príncipe J. Implementation and scalability analysis of balancing domain decomposition methods, Archives of Computational Methods in Engineering, Vol. 20(3), pp. 239-262, 2013

Baiges J. and Codina R. A variational multiscale method with subscales on the element boundaries for the Helmholtz equation, International Journal for Numerical Methods in Engineering, Vol. 93 (2013), 664-684

Baiges J., Codina R. and Idelsohn S. A domain decomposition strategy for reduced order models. Application to the incompressible Navier-Stokes equations, Computer Methods in Applied Mechanics and Engineering, Vol. 267 (2013), 23-42

Baiges J., Codina R. and Idelsohn S. Explicit reduced order models for the stabilized finite element approximation of the incompressible Navier-Stokes equations, International Journal for Numerical Methods in Fluids, Vol. 72 (2013), 1219-1243

Barbero E. J., Cosso F. A. and Martinez X. Identification of Fracture Toughness for Discrete Damage Mechanics Analysis of Glass-Epoxy Laminates. Applied Composite Materials. DOI: 10.1007/s10443-013-9359-y, 2013

Barbero E., Martinez X. and Sosa E.M. Reliability design methodology for confined high pressure inflatable structures. Engineering Structures. 51: 1-9, 2013. ISSN 0141-0296.

Birkmann J., Cardona O. D., Carreño M. L., Barbat A. H., Pelling M., Schneiderbauer S., Kienberger S., Keiler M., Zeil P. and Welle T. Framing vulnerability, risk and societal responses: the MOVE framework, Natural Hazards, 67(2), 193-211, 2013.

Bugeda G. Reflexions sobre el funcionament del «Manual d’avaluació docent del professorat de la UPC», El Butlletí. Publicació bimestral d’AQU Catalunya, vol 65, Marzo 2013.

Bussetta P., Dialami N., Chiumenti M., Agelet de Saracibar C., Cervera M. and Ponthot J.P. Comparison of a fluid and a solid approach for the numerical simulation of friction stir welding with a non-cylindrical pin, Steel Research International, First published on-line: 13 December 2013 | doi: 10.1002/srin.201300182, 2013.

Carbonell J.Mª. and Oñate E. Modelling of tunnelling processes and rock cutting tool wear with the Particle Finite Element Method, Computational Mechanics, Vol. 52 (3), pp. 607-629, 2013

Casoni E., Peraire J. and Huerta A. One-dimensional shock-capturing for high-order Discontinuous Galerkin methods, International Journal for Numerical Methods in Fluids, Vol. 71, Iss. 6, pp. 737-755, 2013

Chacón R., Uribe N. and Oller S. Numerical Validation of the Incremental Launching Method of a Steel Bridge Through a Small-Scale Experimental Study. Experimental Techniques (SEM). Wiley Online Library. November 2013, doi:10.1111/ext.12069. Online ISSN: 1747-1567, 2013

Chinesta F., Leygue A., Bordeu F., Vicente Aguado J., Cueto E., González D., Alfaro I., Ammar A. and Huerta A. PGD-Based Computational Vademecum for Efficient Design, Optimization and Control, Archives of Computational Methods in Engineering, Vol. 20, Issue 1, pp. 31-59, 2013

Chiumenti M., Cervera M., Agelet de Saracibar C. and Dialami N. Numerical modeling of friction stir welding processes, Computer Methods in Applied Mechanics and Engineering, Volume 254, February 2013, pp. 353-369, First published on-line: 10 October 2012 | doi: 10.1016/j.cma.2012.09.013

Codina R. and Badia S. On the design of discontinuous Galerkin methods for elliptic problems based on hybrid formulations, Computer Methods in Applied Mechanics and Engineering, Vol. 263 (2013), 158-168, 2013

Dadvand P., Rossi, R., Gil M., Martorell X., Cotela J. Juanpere E., Idelsohn S. and Oñate E. Migration of a generic multi-physics framework to HPC environments, Computers and Fluids, Vol. 80 (SI), pp. 301-309, 2013

Del Río J. and Cerrolaza M. Influencia de factores hidrodinámicos y estructurales en el comportamiento de las válvulas cardíacas, Rev. Facultad Ingeniería UCV 28(4):115-123

Del Río J., Romero E. and Cerrolaza M. Estudio del flujo sanguíneo con un modelo cardiovascular de parámetros concentrados, Rev. Informe Médico 15(3):28-37 , 2013

Dialami N., Chiumenti M., Cervera M. and Agelet de Saracibar C. An apropos kinematic framework for the numerical modeling of friction stir welding, Computers & Structures, Volume 117, February 2013, pp.48-57, 2013

Dialami N., Chiumenti M., Cervera M., Agelet de Saracibar C. and Ponthot J.P. Material flow visualization in friction stir welding via particle tracing, International Journal of Material Forming, First published on-line: 20 December 2013 | doi: 10.1007/s12289-013-1157-4

Duarte V. and Cerrolaza M. Modelado piezoeléctrico del hueso por el método de los elementos de contorno, Rev. Facultad Ingeniería UCV, 28(4):147-158

Eijo A., Oñate E. and Oller S. A numerical model of delamination in composite laminated beams using the LRZ beam element based on the refined zigzag theory, Composite Structures, Vol. 104, pp. 270-280, 2013

Eijo, A., Oñate E. and Oller S. A four-noded quadrilateral element for composite laminated plates/shells using the refined zigzag theory, Int. Journal for Numerical Methods in Engineering, Vol. 95 (8), pp. 631-660, 2013

García-Berro E., Amblàs G., Sallarés J., Bugeda G. and Roca S. Docencia e investigación: ¿un falso dilema?, Aula Abierta, Vol. 41, Num. 2, pp. 13-22, 2013.

Garitte B., Bond A., Millard A., Zhang C., Mcdermotte C., Nakamaf S. and Gens, A. Analysis of hydro-mechanical processes in a ventilated tunnel in an argillaceous rock on the basis of different modelling approaches. Journal of Rock Mechanics and Geotechnical Engineering 5, 1–17, 2013

Garitte B., Gens A., Vaunat J. and Armand, G. Thermal Conductivity of Argillaceous Rocks: Determination Methodology Using In Situ Heating Tests. Rock Mech Rock Eng. 47(1), 111-129. DOI 10.1007/s00603-012-0335-x, 2013

Gens A., Valleján B., Zandarín M-T. and Sánchez M. Homogenization in clay barriers and seals: Two case studies. Journal of Rock Mechanics and Geotechnical Engineering 5, 191-199 [ link ], 2013

Giorgiani G., Fernández-Méndez, S. and Huerta A. Hybridizable Discontinuous Galerkin p-adaptivity for wave propagation problems, International Journal for Numerical Methods in Fluids, Vol. 72, Num: 12, pp. 1244-1262, 2013

Giorgiani G., Modesto D., Fernández-Méndez S. and Huerta, A. High-order continuous and discontinuous Galerkin methods for wave problems, International Journal for Numerical Methods in Fluids, Vol. 73, Issue 10, pp. 883-903, 2013

Gonzalez D., Cueto E., Chinesta F., Díez P. and Huerta A. SUPG-based stabilization of Proper Generalized Decompositions for the high-dimensional Advection-Diffusion Equations, International Journal for Numerical Methods in Engineering, Vol. 94, Issue: 13, pp. 1216-1232, 2013

Gonzalez Y., Nieto F. and Cerrolaza M. Modeling the nutrients behavior in intervertebral discs: a boundary integral simulation, J. of Molecular & Cell Biomech. 10(1):67-84, 2013

Guasch O. and Codina R. Statistical behavior of the orthogonal subgrid scale stabilization terms in the finite element large eddy simulation of turbulent flows, Computer Methods in Applied Mechanics and Engineering, Vol. 261-262, 154-166, 2013

Guimaraes L. N., Gens A., Sánchez M., Olivella S. A chemo-mechanical constitutive model accounting for cation exchange in expansive clays. Geotechnique 63, (3), 221–234 [ link ], 2013

Hachem E., Feghali S., Codina R. and Coupez T. Anisotropic adaptive meshing and monolithic variational multiscale method for fluid-structure interaction, Computers and Structures, Vol. 122, 88-100, 2013

Hachem E., Feghali S., Codina R. and Coupez T. Immersed stress method for fluid structure interaction using anisotropic mesh adaption, International Journal for Numerical Methods in Engineering, Vol. 94, 805-825, 2013

Herrera R. I. , Vielma J. C. , Ugel R. , Alfaro A. , Barbat A. H. and Pujades L. Seismic response and torsional effects of RC structure with irregular plant and variations in diaphragms, designed with Venezuelan codes, WIT Transactions on the Built Environment, 132, 85-96, 2013

Huerta, A., Angeloski A., Roca X. and Peraire J. Efficiency of high-order elements for continuous and discontinuous Galerkin methods, International Journal for Numerical Methods in Engineering, Vol. 96, Num: 9, pp. 529-560, 2013

Kamran K., Rossi R. and Oñate E. A compressible Lagrangian framework for modeling the fluid–structure interaction in the underwater implosion of an aluminum cylinder, Mathematical Models and Methods in Applied Sciences (M3AS), Vol. 23 (2), pp. 339-367, 2013

Kamran K., Rossi R. and Oñate E. A contact algorithm for shell problems via Delaunay-based meshing of the contact domain, Computational Mechanics, Vol. 52 (1), pp. 1-16, 2013

Kamran K., Rossi R., Oñate E. and Idelsohn S. A compressible Lagrangian framework for the simulation of the underwater implosion of large air bubbles, Computer Methods in Applied Mechanics and Engineering, Vol. 255 (1), pp. 210-225, 2013

Kouhi M., Lee D. S., Bugeda G. and Oñate E. Multi-Objective Aerodynamic Shape Optimization using MOGA coupled to Advanced Adaptive Mesh Refinement, Computers and Fluids, vol. 88, pp. 298-312, 2013.

Larese A., Rossi R., Oñate, E., Toledo M., Moran R. and Campos, H. Numerical and experimental study of overtopping and failure of rockfill dams, International Journal of Geomechanics (ASCE), 2013, 10.1061/(ASCE)GM.1943-5622.0000345

Lee D. S. , Morillo C., Oller S., Bugeda G. and Oñate E. Robust design optimisation of advanced hybrid (fiber-metal) composite structures, Composite Structures, Vol. 99, pp. 181-192, 2013.

Lee D.S., Bugeda G., Periaux J. and Oñate E. Robust active shock control bump design optimisation using hybrid parallel MOGA, Computers and Fluids, Vol. 80, pp. 214 - 224, 2013

Marulanda M. C. , Carreño M. L., Cardona O. D., Ordaz M. G. and Barbat A. H. Probabilistic earthquake risk assessment using CAPRA. Application to the city of Barcelona, Spain, Natural Hazards, 84, 69:59, 2013

Muñoz J. J., Lyamin A. and Huerta A. Stability of anchored sheet wall in cohesive-frictional soils by FE limit analysis, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 37, Number 9, pp. 1213-1230, 2013

Oller S.A., Nallim L. and Oller S. An integrated procedure for the structural design of a composite rotor-hydrofoil of a water current turbine (WCT). Applied Composite Materials. Vol. 20, Issue 6 (2013), Page 1273-1288. Print ISSN: 0929-189X. Online ISSN: 1573-4897, DOI: 10.1007/s10443-013-9332-9

Oñate E., Marti J., Ryzhakov P., Rossi R. and Idelsohn S. Analysis of the melting, burning and flame spread of polymers with the particle finite element method, Computer Assisted Methods in Engineering and Science, Vol. 20 (3), pp. 165–184, 2013

Oñate E., Nadukandi P. and Idelsohn S. P1/P0+ elements for incompressible flows with discontinuous material properties, Computer Methods in Applied Mechanics and Engineering, DOI: 10.1016/j.cma.2013.12.009, 2013

Otin R. A numerical model for the search of the optimum frequency in electromagnetic metal forming, International Journal of Solids and Structures, Vol. 50 (10), pp. 1605-1612, 2013.

Otin R. ERMES: A nodal-based finite element code for electromagnetic simulations in frequency domain, Computer Physics Communications, Vol. 184 (11), pp. 2588-2595, 2013.

Otin R., García-Castillo L. E., Martínez-Fernández I. and García-Doñoro D. Computational performance of a weighted regularized Maxwell equation finite element formulation, Progress In Electromagnetics Research, Vol. 136, pp. 61-77, 2013.

Parés N., Díez P. and Huerta A. Computable exact bounds for linear outputs from stabilized solutions of the advection-diffusion-reaction equation, International Journal for Numerical Methods in Engineering, Vol. 96, Num. 5, pp. 483-509, 2013

Pérez M.A., Martínez X., Oller S., Gil L., Rastellini F. and Flores F. Impact damage prediction in carbon fiber-reinforced laminated composite using the matrix-reinforced mixing theory. Composite Structures. Volume 104, pp. 239 - 248, 2013

Pérez-Foguet A., Casoni E. and Huerta A. Dimensionless analysis of HSDM and application to simulation of breakthrough curves of highly adsorbent porous media, ASCE Journal of Environmental Engineering, Vol. 139, Number 5, pp. 667-676, 2013

Rango R. F. , Nallim L. G. and Oller S. Static and dynamic analysis of thick laminated plates using enriched macroelements. Composite Structures, Volume 101, 2013, Pages 94–103. ISSN: 0263-8223

Rossi, R., Larese de Tetto A., Dadvand P. and Oñate E. An efficient edge-based level set finite element method for free surface flow problems, International Journal for Numerical Methods in Fluids, Vol. 71 (6), pp. 687-716, 2013

Rupcich M., Cerrolaza M. and Bravo R. Biomechanical analysis of the human hip in children with hip arthrodesis, J. of Biomed Eng Res. 2(2):59-65, 2013

Ryzhakov P., Cotela J., Rossi R. and Oñate E. A two-step monolithic method for efficient simulation of incompressible flows, Int. Jour, for Num. Methds. in Fluids, authors, Int. Journ. Num. Meth. in Fluids, doi: 10.1002/fld.3881, 2013

Ryzhakov P., Rossi, R., Viña A. and Oñate E. Modelling and simulation of the sea-landing of aerial vehicles using the Particle Finite Element Method, Ocean Engineering, Vol. 66, pp. 92-100, 2013

Salazar F., Morán R., Rossi R. and Oñate E. Analysis of the discharge capacity of radial-gated spillways using CFD and ANN - Oliana Dam case study, Journal of Hydraulic Research, Vol. 51 (3), pp. 244-252, 2013

Serván-Camas B. and García-Espinosa J. Accelerated 3D multi-body seakeeping simulations using unstructured finite elements. Journal of Computational Physics 252, 382–403, 2013

Soudah E., Rudenick P., Bordone M., Bijnens B., Garcia-Dorado D., Evangelista A. and Oñate E. Validation of numerical flow simulations against in vitro phantom measurements in different type B aortic dissection scenarios, Computer Methods in Biomechanics and Biomedical Engineering, Published online, 2013

Ugel R. , Herrera R. I. , Vielma J. C., Barbat A. H. and Pujades L. Seismic and structural response of a framed four level building with RC and steel structure designed according to current Venezuelan codes, WIT Transactions on the Built Environment, 132, 109-120, 2013

Vargas Y. F. , Pujades L. G. y Barbat A. H. Evaluación probabilista de la capacidad, fragilidad y daño sísmico en edificios de hormigón armado, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 29(2), 63-78, 2013

Vargas Y. F., Pujades L. G., Barbat A. H. and Hurtado J. E. Capacity, fragility and damage in reinforced concrete buildings: a probabilistic approach, Bulletin of Earthquake Engineering, 11(6), 2007-2032, 2013