Url https://www.cimne.com/sgp/rtd/Project.aspx?id=914
LogoEntFinanc LogoPlan
Acronym EUROFUSION HE
Project title Implementation of activities described in the Roadmap to Fusion during Horizon Europe through a joint programme of the members of the EUROfusion consortium
Reference 101052200
Principal investigator Santiago BADIA RODRIGUEZ - sbadia@cimne.upc.edu
Start date 01/01/2021 End date 31/12/2025
Coordinator MAX-PLANCK-GESELLSCHAFT ZUR FORDERUNG DER WISSENSCHAFTEN EV
Consortium members
  • CIEMAT
Program HE (2021-2027) Call EURATOM-2021-ADHOC-IBA
Subprogram EURATOM Category Europeo
Funding body(ies) EC Grant 38.820,75 €
Abstract EUROfusion’s updated Fusion Research Roadmap aims to acquire the necessary knowledge to start constructing a demonstration fusion power plant (DEMO) five years after ITER is in full-power operation. DEMO will deliver fusion electricity to the grid early in the second half of the century. The Roadmap has been articulated in eight different Missions. The present proposal has the goal of implementing the activities described in the Roadmap during Horizon Europe through a joint programme of the members of the EUROfusion Consortium, with the following high-level objectives: 1. Construct and commission ITER; 2. Secure the success of future ITER operation via preparation and experiments on present devices; 3. Develop the conceptual design of a DEMO fusion power plant; 4. Finalise the design and construct a fusion spectrum neutron source (IFMIF-DONES); 5. Advance the stellarator as an alternative approach to fusion power plants; 6. Prepare the ITER and DEMO generations of scientists, engineers and operators; 7. Promote innovation and European industry competitiveness in fusion technology and beyond. The ITER success remains an important overarching objective of the programme and much attention is devoted to ensure that ITER operation is properly prepared, and that a new generation of scientists and engineers is thoroughly educated and trained for its exploitation. DEMO is the only step between ITER and a commercial fusion power plant. To achieve the goal of fusion electricity demonstration in the early 2050-ies, the DEMO Conceptual Design has to be completed by 2030 at the latest, to allow the start of the Engineering Design Activities. DEMO cannot be defined and designed by research laboratories alone, but requires the full involvement of industry in all technological and systems aspects of the design. Therefore, specific provisions for the involvement of industry in the Consortium activities are envisaged.
This Project has received funding from the European Union's Horizon Europe(Euratom Research and Training Programme) under Grant Agreement Nº 101052200 Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them.